Page 71 - ESP Participant Guide_Neat

Module 8: LNG Vehicle Systems and Safety Practices

Lesson 8.4: LNG Vehicle Safety Practices

General Safety ▪ Do not allow an LNG vehicle into a facility that has not been modified specifically
Practices for LNG and/or that does not have a working methane detection system
▪ Wear Personal Protective Equipment (PPE) as prescribed by manufacturer

Welding/Hot Work ▪ Always use welding blanket to protect LNG fuel system components when welding
on or around LNG vehicles
▪ Your company may require additional procedures, such as a fire watch

If You Detect an ▪ LNG is unodorized and cannot be detected by humans
LNG Leak ▪ NEVER bring a leaking LNG vehicle into the maintenance facility - Leave the vehicle
outdoors
▪ Identify the source of the leak
▪ Repair according to manufacturer’s procedures

Methane Gas While optional for CNG maintenance facilities,
Detection Systems methane gas detection systems are REQUIRED
by code for all LNG maintenance facilities

When present, the methane gas detection
system detects methane at potentially unsafe
levels inside a maintenance facility. The
methane gas detection system:

▪ Activates at 25% LFL and may perform
some or all the following:
o Activates an exterior red light
o Activates internal audible/visual
alarms
o Activates emergency exhaust fans
o Activates and opens make-up air (roll-up doors, etc.)
o Deactivates heating system
o Deactivates welding receptacles
o Notifies your organization’s security department
o Notifies fire department, if required

NGV Essentials and Safety Practices © 2019 NGVi All Rights Reserved Page 8-10