Page 5 - catalog gazar valves

Optimum Flow Top-entry Design

Full port or reduce port Openings Give high C Figures. System In-line inspection and repair, after system Depressurizing, sim-
v
pumping efficiency is enhanced And Erosion problems are plifies maintenance.
reduced.

Dual Stem Guides Self-Cleaning

Hardened stem slots and tough Tilting the core away from the seat before rotation causes Immediate flow around 360
guide pins Control the lift-and-turn degrees of the core face. Product Flow flushes any foreign material away from the seat
action of the Stem. without localized, high velocity erosive flow.

Low-torque operation Wear-resistance Hard facing on Core

ORBIT valves turn easily because seal rubbing is The Core face is hard, polished material that will endure difficult ser-
eliminated. vice, without loss of sealing integrity.

Mechanical Cam Closure

The Cam angle at the lower end of the stem provides a mechanically en-
ergized seal.

• Note: Never remove any part from and ORBIT valve unless specifically instructed to do so in the literature, or without first con-
sulting a Cameron representative. Incorrect Procedure could result in personal injury and/or property damage.