Page 23 - ILPT catalogue

P800
Excellent abrasion resistance. Good chemical stability.
High Fracture Resistance
Fine CBN particles increase cutting edge toughness.
The high fracture resistance allows stable performance even during interrupted cutting.
High adhesion resistance of fine CBN particles.
Optimization of the sintering conditions strengthens adhesion between the CBN particles.
This increases both fracture and wear resistance.
application area
Excellent in machining powder metallurgy applications where carbide content is lower
300 200
p6000
100
P800 Cutting range from continuous to light interruption
P6000 Suitable for continuous cutting.
P350 Cutting range from continuous to light interruption.
1500 1000
500 0
P800
p800 p350
Light Interrupted
competition
Continuous
Interrupted
CUTTING PERFORMANCE
Insert
Workpiece Material
Cutting Speed(m/min)
Feed (mm/rev.)
Depth of Cut (mm)
Machining
P800 BVS BITE
Powder Metallurgy
Vc ~117
f = 0.06
ap-0.15
Turning
STANDARD CUTTING CONDITIONS
Application Workpiece Material Cutting Speed Feed (mm/rev.) Depth of Cut (mm) Purpose Dry Wet
Turning 50-180 (m/min.)
0.1-0.5max 0.6max Rough/Finish
www.ilpttools.com/industry-success-stories
19
Cutting speed: Vc(m/min)
Tool life (no.)