Page 42 - ILPT catalogue

P17 SP 590 CH30° MILLING INSERT
Features
Face milling insert.
Surface roughness of sub micron can be achieved. Insert can be used at high feed and high RPM.
SP 590= 1.5x Competitor
10000
ILPT
7500 5000
2500 0
competition
ACTUAL CUTTING CONDITIONS
Work Material
Application
Cutting Speed(m/min)
Feed (mm/rev.)
Depth of Cut (mm)
Machining Dry Wet
Aluminium
Face Milling
Vc ~1507
f = 0.09
ap-2
P17 fdcn 2005 r1.2 MILLING wiper INSERT
Features
Face milling insert.
Finish value of sub micron can be achieved as compared to competitor insert. These inserts can be used at high feed and high RPM.
ILPT= 1.2x Competitor
100000 75000 50000
25000 0
ILPT
competition
ACTUAL CUTTING CONDITIONS
Work Material
Application
Cutting Speed(m/min)
Feed (mm/rev.)
Depth of Cut (mm)
Machining Dry Wet
Aluminium
Turning
Vc ~1884
f = 0.16
ap-3
www.ilpttools.com/industry-success-stories
Tool life (no.) Tool life (no.)