Page 366 - Modernfold Architectural Products

Modernfold GWS PureView Plus Technical Data
®
10 22 26 Operable Partitions

MOVABLE GLASS WALL TECHNICAL DATA

delivery, storage, and handling to comply with partitions with manufacturer’s standard panel
manufacturer’s direction and as required to sizes to form an assembled system of dimensions
prevent damage to the glass and hardware. indicated on Drawings, and verified by field
measurements.
1.6 WARRANTY 1. Maximum panel width: 48-inches (1219 mm)
A. Manufacturer’s Special Project Warranty 2. Standard rail thickness: 1-9/16-inches (40 mm)
on Glass Panels: Provide written warranty C. Top and Bottom Rails: Continuous two-piece
signed by the manufacturer of glass operable assemblies with removable end caps. Rails fasten
partitions agreeing to replace those panels with together from alternate sides of partition allowing
manufacturing defects. for field adjustment to job site conditions. Snap-
1. Manufacturing defects are defined as any on covers are furnished to facilitate installation.
defect materially obstructing vision through D. Horizontal Top and Bottom Seals: Continuous
the glass, and mechanical failure of hardware contact brush type seals without the need for
which prevents the proper operation of the mechanically operated parts.
panels after appropriate installation. E. Bottom Rail Locking System: Engage adjacent
2. Warranty period: One (1) year from date of panels by use of interlocking floor bolts to stabilize
installation. panels from movement in all directions.
1. Equip a minimum of one end panel with a
PART 2 - PRODUCTS brass, mortised lock allowing for cylinder and/
or thumb turn operation. Round bolts engage
2.1 MANUFACTURERS, PRODUCTS, AND OPERATION eccentric bushing floor strikes for security.
A. Manufacturers: Subject to compliance with 2. Pivot panels to have mortised cylinder with key
requirements, provide products by one of the and thumb turn.
following: 3. Intermediate panels to have interconnecting
1. Modernfold, Inc. floor bolts.
B. Products: Subject to compliance with the 4. Lead panels to have mortised cylinder with
requirements, provide one of the following thumb turn.
products:
1. Modernfold Glass Wall Model PureView Plus 2.4 MATERIALS
with 4-1/8-inch (105mm) square top and A. Aluminum: Alloy and temper recommended by
bottom rails and 1-3/4-inch (45mm) carrier aluminum producer and finisher for type of use,
profile. corrosion resistance, and finish indicated; ASTM
B221 (ASTM B221M) for extrusions; manufacturer’s
2.2 OPERATION standard strengths and thicknesses for type of
A. Manually operated and top-supported series of use.
individual glass panels. Panels use two-piece, B. Glass Type: Tempered, 1/2-inch (13 mm)
clamp-on top and bottom rail that fastens complying with safety standards specified in ANSI
together from alternating sides. Z97.1 CPSC16, CFR1201, ASTM C1036 and ASTM
1. Final closure (Select one): C1048.
a. Pivot panel. C. Glass Finish (choose one):
b. Standard intermediate panel ending 1. Clear tempered
within storage pocket, or at face of 2. Low-iron tempered
storage pocket. 3. Frosted tempered
4. Markerboard Low-iron tempered “Polar White”
2.3 CONSTRUCTION D. Panel weight: 7.5 lbs./square foot
A. Provide top reinforcement as required to
support panel from suspension components 2.5 PANEL FINISHES
and provide reinforcement for hardware A. Provide top and bottom rails with one of the
attachment. Fabricate panels with concealed following finishes:
fasteners. Finished in-place partition shall be 1. Clear anodized aluminum
rigid, level, plumb, aligned with uniform joints 2. Dark Bronze anodized aluminum
and appearance; free of bow, warp, twist, 3. Black anodized aluminum
deformation, and surface and finish irregularities. 4. Satin stainless anodized aluminum
B. Dimensions: Fabricate operable glass panel 5. White Powder Coat (RAL 9016)

2 Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com.