Page 406 - Modernfold Architectural Products

Soundmaster & Modernfold Technical Data
®
®
08 35 13 Accordion Folding Doors

Soundmaster & Modernfold TECHNICAL DATA
®
®

This specification along with product information and model details can be downloaded from www.modernfold.com
SPECIFICATION - SECTION 08 35 13 ACCORDION FOLDING DOORS

PART 1 - GENERAL and accessories. Indicate dimensions, weights,
conditions at openings, and at storage areas,
1.1 RELATED DOCUMENTS and required installation, storage, and operating
A. Drawings and general provisions of the Contract clearances. Indicate location and installation
including General and Supplementary Conditions requirements for hardware and track, including
and Division 01 Specification Sections, apply to floor tolerances required and direction of travel.
this Section. Indicate blocking to be provided by others.
C. Setting Drawings: Show imbedded items and
1.2 SUMMARY cutouts required in other work, including support
A. This Section includes the following: beam punching template.
1. Furnish and install accordion folding partitions D. Samples: Color samples demonstrating full range
as indicated in drawings. of finishes available by architect. Verification
B. Related Sections include the following: samples will be available in same thickness and
1. Division 03 Sections for concrete tolerances material indicated for the work.
required.
2. Division 05 Sections for primary structural 1.5 DELIVERY, STORAGE, AND HANDLING
support, including pre-punching of support A. Clearly mark packages and partitions with
members by structural steel supplier per numbering systems used on Shop Drawings. Do
partition supplier’s template. not use permanent markings on partitions.
3. Division 06 Sections for wood framing and B. Protect partitions during delivery, storage, and
supports, and all blocking at head and jambs handling to comply with manufacturer’s direction
as required. and as required to prevent damage.
4. Division 09 Sections for wall and ceiling framing
at head and jambs. 1.6 WARRANTY
A. Provide written warranty by manufacturer of
1.3 QUALITY ASSURANCE partitions agreeing to repair or replace any
A. Installer Qualifications: An experienced installer components with manufacturing defects.
who is certified in writing by the partition B. Warranty period: Two (2) years.
manufacturer, as qualified to install the
manufacturer’s partition systems for work similar in PART 2 – PRODUCTS (SOUNDMASTER)
material, design, and extent to that indicated for
this Project. 2.1 MANUFACTURERS, PRODUCTS, AND OPERATION
B. Preparation of the opening shall conform to A. Manufacturers: Subject to compliance with
the dimensions specified, plumb, level, and in requirements, provide product by the following:
accordance to building practices. 1. Modernfold, Inc.
C. Acoustical Performance: Test partitions in B. Products: Subject to compliance with the
an independent acoustical laboratory in requirements, provide the following product:
accordance with ASTM E90 to attain no less than 1. Soundmaster #8 Accordion Folding Partition.
the STC rating specified. Provide a complete 2. Soundmaster #12 Accordion Folding Partition.
and unedited written test report by the testing
laboratory upon request. 2.2 OPERATION
A. Soundmaster #8: Manually operated, top
1.4 SUBMITTALS supported, accordion folding.
A. Product Data: Material descriptions, construction B. Soundmaster #12: Manually operated, top
details, finishes, installation details, and supported, accordion folding.
operating instructions for each type of partition,
component, and accessory specified. 2.3 CONSTRUCTION
B. Shop Drawings: Show location and extent of A. Shall consist of steel hinge plates welded to
partitions. Include plans, elevations, sections, 3/16-inch (5mm) diameter vertical steel rods,
details, attachments to other construction, with a single row of plates at the bottom and top

Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com. 1