Page 77 - Modernfold Architectural Products

Acousti-Seal 931 Technical Data
®
10 22 26 (10650) Operable Partitions

ACOUSTI-SEAL 900 SERIES TECHNICAL DATA
®
D. RT200 Suspension System: Multi-Directional 3. Hardware:
1. Suspension Tracks: Precision heat-treated extruded a. Automatic door closures.
aluminum. Track to be supported by pairs of b. Self-Illuminated exit signs.
3/8-inch (9.5 mm) diameter threaded rods. c. Panic hardware.
a. Exposed track soffit: Aluminum, integral to B. Work Surfaces:
track, pre-painted off-white. 1. Markerboard: White enamel on steel, bonded
2. Carriers: Shall have horizontal counter-rotating to the face of the panel with horizontal
wheels with oversized, steel reinforced, heavy trim without exposed fasteners. Trim is not
duty steel thrust bearings. Carriers permit acceptable on vertical edges to provide
panels to traverse L, T, or X intersections without uninterrupted work surface.
mechanical switching. 2. Tackboard: Minimum 1/4-inch (6.35mm)
3. Warranty period: Two (2) years. natural cork, covered with vinyl or fabric, with
horizontal trim without exposed fasteners. Trim
- OR – is not acceptable on vertical edges.
C. Available Accessories/Options:
E. Modernfold Truss System: Pre-fabricated, self- 1. Pocket Doors: Acousti-Seal Pocket Doors by
®
supporting header system for the support of Modernfold, Inc., with same finish and
operable partitions. (For complete specification appearance as the adjacent panels.
see Modernfold Truss System brochure Form #2600) 2. Finished end caps at 90°/135°.
3. Intersecting partition interface.
2.7 OPTIONS 4. Inset window options: glazed or unglazed.
A. Pass Doors:
1. Single Pass Doors (select one): PART 3 – EXECUTION
a. Standard hollow metal door hung in a
steel frame. ADA-compliant pass door to 3.1 INSTALLATION
be equipped with friction latch and flush A. General: Comply with ASTM E557, operable
pulls for panic operation. No threshold will partition manufacturer’s written installation
be permitted. instructions, Drawings and approved Shop
i. Pass door to be prime painted for field Drawings.
finishing. B. Install operable partitions and accessories after
ii. Pass door to be painted one other finishing operations, including painting have
consistent color from manufacturer’s been completed.
standard offering. C. Match operable partitions by installing panels
b. Matching pass door same thickness from marked packages in numbered sequence
and appearance as the panels. ADA- indicated on Shop Drawings.
compliant pass door equipped with D. Broken, cracked, chipped, deformed or
friction latch and flush pulls for panic unmatched panels are not acceptable.
operation. No threshold will be permitted.
2. Double Pass Doors (select one): 3.2 CLEANING AND PROTECTION
a. Standard hollow metal doors hung in a A. Clean partition surfaces upon completing
steel frame. No center post is permitted. installation of operable partitions to remove
Active leaf to be equipped with friction dust, dirt, adhesives, and other foreign materials
latch and flush pulls for panic operation. according to manufacturer’s written instructions.
No threshold will be permitted. B. Provide final protection and maintain conditions
i. Pass door to be prime painted for field in a manner acceptable to the manufacturer and
finishing. installer that insure operable partitions are without
ii. Pass door to be painted one damage or deterioration at time of Substantial
consistent color from manufacturer’s Completion.
standard offering.
b. Matching pass door same thickness and 3.3 ADJUSTING
appearance as the panels. No center A. Adjust operable partitions to operate smoothly,
post is permitted. Active leaf to be easily, and quietly, free from binding, warp,
trimless and equipped with friction latch excessive deflection, distortion, nonalignment,
and flush pulls for panic operation. No misplacement, disruption, or malfunction,
threshold will be permitted. throughout entire operational range. Lubricate
hardware and other moving parts.

4 Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com.