Page 3 - Untitled-1

Positive Displacement Meters / Oil Consumption Meters
Range : 1 LPH ~ 30,000 LPH
Size : 4 mm ~ 50 mm
Accuracy : ± 0.5 % of Measured Value
O
Max. Temp. : 180 C
Max. Pressure : 40 bar
Service : Oil, Heavy Fuel Oil, Chemicals, Milk, Solvents
End Connections : Screwed, Flanged
Out-put Signal : Pulse / 4~20 / 0~100 Hz / Relay
Approvals : EEC, PTB, GL, DNV, LR
Special Versions for Fuel Consumption Measurement in
Vehicles & Ships

Industrial Fluids / Solvents / Chemicals etc Flow Meters

Type: Turbine / Positive Displacement
Body: Brass / SS / PTFE
Piston: Aluminium / SS / Hard Rubber / PTFE / Graphite
Temp.: 90 / 130 / 180 deg C
Pressure: 16 / 25 / 40 bar
Signal Output: Pulse / 4 - 20 mA
Viscosity: upto 10000 mPa.s
Measuring error: ± 0.5% of measured value
Repeatability: ± 0.1%
Pressure Drop: 0.1 ~ 0.5 bar at Qmax

Positive Displacement Flow Meter for Edible Oil / High Viscosity Fluids
Range : 0.2 ~ 340 m / hour
3
Size : 10 mm ~ 200 mm
Accuracy : ± 0.5% / ± 0.2% of Measured Value
O
Max. Temp. : 280 C
Max. Pressure : 64 bar
Service : Oil, Heavy Fuel Oil, Chemicals, Milk, Solvents
End Connections : Screwed, Flanged
Out-put Signal : Pulse / 4~20 / 0~100 Hz / Relay
Standard Viscosity up to 5000 cP
MOC available Cast Iron, Cast Steel & Stainless Steel

Thermal Mass Flow Meters

Size: Inline: DN 4 to DN 300
Insertion: DN 40 to DN 2000 (Max DN 3000)
Measuring range: 0.5 ~ 60 m/s
Servic: Gas (except for acetylene)
Pressure: 25 bar (High Pressure : 200 bar)
Output Signal: 4-20 mA
Communication Interface: MODBUS / HART / GPRS
Accuracy: + / - 0.5%, + / - 1%
Repeatability: 0.2%
Protection: IP 65 / IP 68
Explosion Proof: d II CT3

Steam Flow Meter
Versatile flow meter, can be used for Steam, Air, Water & Gas
Standard make of DPT offered e.g. ABB, Rosemount, Yukogava
Flow indicator totaliser of IOTA make
IBR Certification facility for steam application available
It is low cost, simple and rugged flow meter. A restriction is
created on the path of flowing media and pressure differential
generated is monitored to ascertain the flow rate and total
volume. Pressure and Temperature compensation is also
available to compensate for variations in process parameters.