Page 16 - 2018 Racecar Engineering Open Wheel Parts and Accessories Catalog

SPRINT CAR COMPONENTS

Titanium Pinch Bolt Kit For Quick Change Cover Nuts
Torsion Arms And Pitman Arms ALL72060
ALL17032 Aluminum nuts are pre-drilled for safety
Kit includes five bolts to replace standard 3/8"-24 wire to prevent nuts from working loose and causing leaks. Nuts
x 1-7/8" hardware found in most torsion and pitman have 3/8"-16 threads. Package of 10.
arms. Bolt kit weighs less than 90 grams.
Quick Change Cover Lock Kit
Titanium Bolt Kit For Torsion Arm Stop Adjuster ALL72062
ALL17034 Securely locks cover in
place for quick removal and
Kit includes four 7/16"-20 stop adjuster bolts
with 9/16" heads to replace or upgrade stan- re-installation. Unique clip
releases with a quick pull and
dard hardware found in torsion arm stops. Kit
weighs less than 80 grams. eliminates safety wire. Aluminum
nuts have 3/8"-16 threads. Kit includes two machined aluminum
plates, four steel clips and four aluminum nuts with snap rings. Cover
not included.
Rapid Install “Quick Change Gear Cover”
Part No. Description
The ultimate quick change Replacement Parts
gear cover! Speed up gear
Cover Nuts With Snap Rings,
changes and never again waste ALL99118 10-Pack
time due to cover nuts! Unique
design holds nuts directly on the ALL99119 Snap Rings, 10-Pack
6061-T6 billet aluminum cover. ALL99120 Clips, 2-Pack
Replacement Lock Plates
Part No. Description ALL99138
Frankland And Winters, For ALL72062, 1-Pair
ALL72064
Standard Bearing
Frankland And Winters,
ALL72065 Quick Change Cover Gaskets
Large Bearing
ALL72066 DMI Bulldog Rear End Part No. Description ALL72052
Related Components ALL72050 Paper
Cover Nuts, Black ALL72052 Thick With Steel Core
ALL72068
Aluminum, 2-Pack
Cover Nut Retainers
ALL72069
With Allen Bolt, 2-Pack
BRAKES
ALL41048
Master Cylinder Remote Reservoirs Residual Check Valves
High-impact plastic remote reservoirs simplify Residual check valves hold a
brake bleeding, especially when master cylinder is small amount of pressure in the
mounted low in the chassis. Available with single or brake system to keep the brake
dual outlet and may be connected to master cylinder system functioning properly ALL41049
with a 5/16" hose. while helping to maintain a firm
Part No. Description pedal. Maintaining system
ALL42045 Single Outlet pressure prevents fluid from
ALL42046 Dual Outlet returning to the master cylinder
when the master cylinder is positioned lower than or close to the
same height as the calipers or wheel cylinders. Proper system pres-
sure also keeps piston and wheel cylinder seals expanded creating a
Brake Shut-Off Valve ALL48010 positive seal and brake pads seated against the rotor. Valves include
Valve has 1/8"NPT inlet and outlet and is rated at two 3/16" inverted flare fittings.
2,000 PSI. Use Allstar ALL50120 fitting for 3/16" Part No. Description
inverted flare brake line. Dimensions: 1/2" W x ALL41048 2 Lb. For Disc Brakes
1-3/4" L x 1-9/16" H. ALL41049 10 Lb. For Drum Brakes
Brake Bias Adjusters
Proportioning Valve ALL48025 ALL42072
Adjust front-to-rear brake bias with the twist of Adjust brake bias from the
a knob. Provides up to 57% reduc- driver seat to compensate for
tion. Fitting ports are 1/8"NPT. Valve changing track conditions. Adjust-
includes two fittings to adapt to 3/16" ers mount to balance bars with 3/8"-
brake line. 1" long, 1-3/4" wide and 24 threads. Comes with 5 ft. long cable-style adjuster.
3-5/16" tall.

15