Page 14 - QR IMER C350 IPOWER
P. 14

IMER INTERNATIONAL S.p.A.                                                                                                       GB

NOISE RISK                              C 350 iPower

                                                     16. TROUBLESHOOTING

            Ear protection must be worn                                         - CAUTION!!! All maintenance operations must be performed
                                                                          exclusively with the machine switched off, with the selector set to
                                                                          “0” and the power plug disconnected from the mains.

RISK OF INJURY TO THE HANDS                                               Trouble                         Causes                   Remedies
                              Safety gloves must be worn                                                                  Check the line *
                                                                                                Current does not reach
RISK OF INJURY TO THE EYES                                                                      the supply line           Restore correct
                             Eye protection must be worn                                                                  connection
                                                                                                The socket and plug
ABNORMAL USE RISK                                                                               are not connected
                  Reading the manual before use is compulsory                                   properly

                          Cutting with water is compulsory                The motor does not    The differential switch   Turn the differential
DANGER OF CUTTING                                                         start when the start  is off                    switch on
                                                                          switch is pressed                               Change the cable *
DANGER OF ELECTROCUTION                                                                         The power cable from
                                                                                                the plug to the panel     Restore the connection *
                                                                                                is cut off
                                                                                                                          Change the switch *
                                                                                                An electric wire inside
                                                                                                the motor terminal strip
                                                                                                is cut off

                                                                                                An electric wire inside
                                                                                                the panel is cut off

                                                                          Cooling water fails   The start switch is       Change the switch *
                                                                          to reach the blade    faulty
                                                                                                                          Restore the water level
                                                                                                Low water level in tank   Clean the pump filter
                                                                                                                          Check the pump
                                                                                                Pump filter clogged        electrical supply *
                                                                                                                          Change the pump *
                                                                                                Current fails to reach
                                                                                                the pump

                                                                                                Pump failure

                                                                          The blade does        Blade fitted in the        Remove the blade
                                                                          not cut               opposite direction to     and reposition it in the
                                                                                                that of rotation          direction shown on the
                                                                                                                          blade label
                                                                                                Worn blade
                                                                                                                          Change the blade

                                                                          * Operation to be carried out by an electrician

DANGER: LASER BEAM

Please be reminded that checking the use of IPDs is delegated to the
employer.

                                                                      13
   9   10   11   12   13   14   15   16   17   18   19