Page 97 - KLINDEX E_CATALOG130419

›› Preparing the substrate ›The following is recommended to remove ripples,
creases and surplus material:
ACCESSORIES • Planetary polishing machine and DA00 or DA0 tools
• Single-brush fitted with Carborundum.
DA DIAMOND TOOLS 5,5”/ø140mm ›Timba with Skraper PCD is recommended to remove
5 SEGMENTS considerable thicknesses of a substrate and slightly
140819 DA00 Grit 20 lower the values of screed. We recommend Super
140820 DA0 Grit 40 Skraper PCD Triple to remove old glue from an
undercoat.

CARBORUNDUM ø406mm (16”)
It is an ideal accessory for levelling
cement floors.
It eliminates brush marks and surplus
materials.

410728 Complete with flange

410729 Spare part ring

410728FUT Complete with flange

DA RING 400 SUPER SKRAPER PCD DIAMOND TOOLS
400819VEL DA00 Grit 20 5,5 Ø140mm

70094140AS Super Skraper PCD Triple

›› Preparation on floors in general

We recommend using the Klindex Polishing Machine
with CS or BT series tools to create scratches and a
rough surface to improve the adhesion of a new coating
on an existing floor made of tiles, gres or other material.

ACCESSORIES BT00 ø140mm (5,5”)
Diamond tools with round segments
CS ø140mm (5,5”) designed for effective grinding and
For preparation of floors before laying removing resin, glue and varnish. Also
new parquet. To make scratches on suitable for concrete grinding.
ceramic floors to allow a good grip.
140720 CS0 140719BT4S BT0
140721 CS1
140722 CS1 25

Sanding Innovation ⋅ since 1988