Page 24 - QR CIMAR TAMPING RAMMER

CT-73RA – TROUBLESHOOTING GUIDE

Table 4: ENGINE TROUBLESHOOTING (Continued)

Symptom Possible Problem Solution

Operation not Satisfactory

Governor adjustment Adjust governor to correct

Rotational speed improper? level.

fluctuates. Governor spring Clean or replace ignition.

defective?

Fuel flow erratic? Check fuel line.

Air taken in through Check suction line.

suction line?

Recoil starter not working Dust in rotating part? Clean recoil starter

properly. assembly.

Spiral spring failure? Replace spiral spring.

Table 5: RAMMER TROUBLESHOOTING

Symptom Possible Problem Solution

Operating speed of throttle Set throttle lever to correct

lever is incorrectly set? position.

Engine runs but rammer Oil in excess? Drain excess oil. Bring to

jumps erratically or not at correct level.

all. Clutch slips? Replace or adjust clutch.

Spring Failure? Replace spiral spring.

Speed of engine Adjust engine speed to

improper? correct operating RPM

setting.

Soil over-compacted? Shut down machine and

test oil.

CT-73RA – NAMEPLATE

Fig. 14: Nameplate