Page 100 - IMER E-CATALOG140419
P. 100
TILE, MASONRY & SLAB SAWS
D C
B E
A
F
STAINLESS STEEL SURFACE STAINLESS STEEL OR ELECTRIC WATER PUMP
ALUMINIUM SURFACE
A ANODISED EXTRUDED B IMER saws are fitted with an electric pump
ALUMINIUM CUTTING that ensures a constant flow of water to the
SURFACE cutting disk. The water flow is regulated
through a special tap to allow correct disk cooling and
The COMBI 200VA, 250VA machines have a cutting surface optimise cutting.
made of anodised extruded aluminium. The C350 iPower
machine has a cutting surface made of stainless steel. The WATER RECOVERY TRAY
cutting surface is normally the part most subject to wear and
corrosion as it is constantly in contact with water and highly The water recovery tray is made of plastic to prevent any
abrasive materials. Stainless steel and anodised aluminium possibility of corrosion. Thanks to the lightweight material
completely eliminate the risk of corrosion and guarantee high used, the tray is also easy to remove from the machine for
resistance to wear. The holes and fretting of the aluminium on cleaning. In the Combi 200VA, COMBI 250VA, C350 iPower, M400 Smart, Masonry 750 models
the cutting surface facilitate the flow of water to the tray and emptying can be carried out without removing the tray from the machine.
eliminate the suction effect of the material.
MAXIMUM CUTTING
45° CUTTING
E ACCURACY
D All the machines have the possibility of In order to guarantee the maximum cutting
45° cutting. The cutting head and travel accuracy, the travel bar is made of extruded
bar can be sloped in just seconds. aluminium or steel section bars depending on the models.
A clamp ensures the stability of the travel bar, The runner parts of the cutting head are formed of wheels
keeping cutting accuracy unchanged. mounted on sealed ball bearings. This system offers very
smooth running and maximum cutting accuracy.
38
