Page 9 - IMER E-CATALOG140419

+ Can be disassembled
into 4 modules for
Handles easy transport
for transport
Accessories box 4 speed material
flow rate until 26 l/m

(Material flow rate with
MONO CLAMP stator: 8-11-14-17 l/m)

Feeding wheel for
optimum mixing chamber
supply with every type of
premixed material

Blower hood (optional)

Lightened and thermal plaster products

Recommended accessories for ✓ 1107084 Stator D 5-2.5 MONO CLAMP – Violet 8-17 l/min Supply - 230V/50Hz
✓ 1107085 Rotor D 5-2.5 MONO CLAMP (without turbo mixer)
✓ 1107162 Rotor MONO CLAMP with pin (only with turbo mixer) Max. installed power kW 3.6
✓ 1107517 Turbo mixer
✓ 1107541 Mixer for insulating plasters Koine 35, Koine 4 Mixing motor power kW 2.2

Lightened floor screeds Feeding wheel gear motor power kW 0.25

✓ 1107030 Stator D 8-1.5 MONO CLAMP – Green Electric compressor - kW 0.75 250 l/min
✓ 1107031 Rotor D 8-1.5 MONO CLAMP (without turbo mixer)
✓ 1107029 Rotor D 8-1.5 with pin – YELLOW (only with turbo mixer) Material flow rate* l/min 8-11-14-17
✓ 1107517 Turbo mixer
Maximum pumping distance** m 15

Hopper capacity l 110

Loading height mm 900

Dimensions width/length/h mm 680/1560/1190

Weight kg 255

Sound pressure level dB(A) < 76

* The material flow rate may vary depending on the type of stator and type of material used. 7
** The pumping distance may vary depending on the type of material used, pumping height, material consistency, type of pump installed.