Page 37 - QR PENTRUDER 3P8
P. 37
Operators Manual - High Frequency driven Pentruder 3P8 Wire Saw
Remote control unit
The remote control unit is connected to the power pack through a Cannon connector. It is not
possible to control any functions on the power pack unless the remote control is connected to
the power pack.
Available functions:
Switch for Blade First push forward and hold the switch for Water ON/OFF and then
Motor ON/OFF: push the Blade ON / OFF switch forward to start the blade. To stop
the blade, push the Blade ON / OFF switch forward once again.
Switch for water valve: Move the switch forward to start and stop the water flow through the
machine. The water flow will be switched on automatically when the
HF-motor is started. The water must be switched off manually.
Potentiometer for wire
speed control
Potentiometer for feed
and power regulation
Joystick for manual control
of the feed; Flick the joystick up to manually take care of slack in some situations.
Joystick for manual control Potentiometer for wire speed control
of the feed
Potentiometer for feed and
power regulation
Pentruder® - Stronger than ever! HF-motor
Applying Standards That Are Years Ahead Of the Competition. ON/OFF switch
Fig. 32 Remote control unit
Tractive AB 17 March 2009 Page 35
