Page 63 - PPW E-CATALOG280419
P. 63
2018
Application of floorings
Mortar-mixing cart (2200)
The mortar-mixing cart (2200) is designed to mix approx. 50 kg
synthetic- or mineral-bound mortar homogeneously in 2 or 3 minutes
for processing.
Because of the total height, the mixing container can be emptied directly
into a barrel or wheelbarrow. For this, open the draining shutter in the
bottom of the mixing drum while the stirring unit is revolving and the
mortar falls from the mixing drum into the barrel.
The barrel should have a maximum height of 65 cm ~25 5/8 inch,
for example PE barrel on page 80.
The mortar-mixing cart can easily be cleaned. Simply take the
stirring unit out of the mixing drum by lifting the square
driveshaft of the gear unit.
Transportation of the mortar-mixing cart is even
possible in a passenger car because you
can easily dismantle the legs of the
cart.
Technical data
nominal voltage 230 V / 50 Hz
nominal capacity 1.1 kW
nominal current 9.0 A
protective system IP 54
drive of stirring unit 35 rpm
measurements
height 105 cm ~42 inch
width 70 cm ~28 inch
length 110 cm ~44 inch
PAGE 63
