Page 73 - PPW E-CATALOG280419
P. 73
2018
POLYPLAN-dispenser
unbreakable and stable polythene (PE) material
This dispenser is suitable for quick and exact filling of hardeners and accelerators.
Good application for mass fillings in particular because of its constant quantities.
By shifting the marking (A) the quantity to be filled can be adjusted easily.
The measuring tube B, is filling by pressing the bottle (C).
On release the excess quantity flows back into the bottle so that the desired quantity
of fluid remains in the measuring tube (B). This can then be poured out.
A
B
C
POLYPLAN-dispenser (100) < POLYPLAN-dispenser (25) <
including a 2.5 liter PE-bottle for filling up to 100 ccm including a 1 liter PE-bottle for filling up to 25 ccm
Wetcoating-thickness gauge (2300)
made of aluminium
By putting the the wetcoating-thickness gauge on any ground the
height of the wet coating can be measured exactly.
Measuring accuracy 0 – 2000 µm.
The scales are solvent-resistant anodized.
PAGE 73
