Page 21 - QR KLINDEX EXPANDER850AT-RXt
P. 21
RECEIVING THE PRODUCT
2.1.2 Manual handling The appliance can now be moved either manually or
using the radio control:
l WARNINGS – to move it manually, unhitch the drive mechanism
– Before handling the appliance, fit the
caster wheel as described in section “ on both wheels by pulling and twisting the pin (1).
Fitting/removing the caster wheel” Push the handle bar and guide the appliance, sliding
on page 17 and the handle grip as de- it carefully off the pallet; see section “Manual han-
scribed in section “Fitting and adjust- dling” on page 23
ing the handle grip” on page 17.
– To make it easier to slide the appliance a WARNING
off the pallet, install a ramp that is the Take extra care when disconnecting the
same height as the pallet, at a 30° angle drive mechanism as the appliance may
(maximum). slide down the ramp.
After fitting the caster wheel and the handlebar: – to move it using the radio control, see section “Mov-
– position the ramp in front of the appliance ing the appliance with the radio control” on page
– make sure that the drive mechanism on the wheels 20.
is hitched 2.2 What is included?
– turn the appliance on using the battery power
A metal case is provided together with the appliance
supply on the appliance or by connecting it to the containing the following equipment:
mains, see sections “Appliance battery” on page 15 – radio control
and “Connecting to the power socket” on page 24 – battery charger for the 220V radio control
– connect the radio transmitter to the appliance con- – second battery for the radio control
trol connector if you are using a radio control, or the – electric panel key
electrical cable on the handlebar if you are using a – spare fuse (1 for each fuse in the electric panel)
control panel; see sections “Connecting the radio – appliance power supply plug.
transmitter” on page 18, “Starting the appliance
using the radio control” on page 34 and “Starting Inside the case, there is a wallet containing the follow-
in manual mode” on page 41 ing documentation:
– lift the appliance using the planetary lift/lower sin- – wiring diagram
gle-axle joystick on the radio control or on the con- – test sheet
trol panel. – instruction manual
– inverter error sheet (inverter documentation).
1
The instruction manual is an integral part of the
product and must be read carefully before using
the EXPANDER AT. It must be stored carefully so
that it can be consulted at a later date and it must
ALWAYS accompany the EXPANDER AT. In the
event of any damage or loss, request a copy from
Klindex S.r.l. support.
< 30°
www.klindex.com - Made in Italy 7
