Page 7 - Premium White Adhesives

HAMMER SH

The Ultimate Premium White Adhesive since more than 14 years. Key Application Steps: Precautionary Steps:

Features & Benefits: Plywood & Laminate surfaces should be While applying HAMMER SH on Ply, Laminate Surface

free of dust, wax & stickers. Preferably make sure the deposition is sufficient and uniform.
Superior grade Synthetic Resin Wood Adhesive the surfaces to be glued, should be
Both Surfaces should be clean, dry and free from any
High performance, non toxic, non hazardous adhesive sanded and cleaned with cloth. kind of grease, dust and oil.

Resistance to heat and water
Stir the contents of the glue container Frequent pressure must be applied in vertical
Single component adhesive system
just before application & spread the glue applications.
Water based adhesive - eco friendly & easy clean up uniformly with a plastic notch spreader,

Unsurpassed bonding strength first on the laminate (non porous surface)

Prolonged shelf life & then on plywood (porous surface). General Instructions/Precautions for Uses:

Good coverage
Once the tack is formed & the film turns
transparent, paste the surfaces properly. Store awy from direct heat and sunlight
Areas of Application:
Bring the laminate in contact to HAMMER Skin Formation, If any should be removed before use
SH coated ply surface and make proper
Laminate to Plywood alignment. Stir the content of the container well before use

Veneer to Plywood Water should not be added for dilution as it may

Wood to Wood bonding adversely affect the performance of the product

Laminate to MDF/Particle Board/Block Board

Furniture Manufacturing

Pack Size: Press the laminated portion by using wet
squeezed cloth to remove air entraption.

220 Kg in HDPE Blue Barrel

50 Kg in HDPE White Drum

20 Kg in White Bucket

10 Kg in White Bucket

5 Kg in White Bucket Apply masking tap on the edges & keep

2 Kg in White Bucket under pressure. Handling strength is
received with in 6-8 hours, so finishing
1 Kg in White Bucket
work can start. Full strength will be
500 g in White Bucket
achieved with in 24 hours. under room

temperature.