Page 5 - HAMMER SPEED

HAMMER SPEED

High Strength Heat Resistance & Waterproof Adhesive Key Application Steps: Precautionary Steps:

HAMMER SPEED is high strength Heat Resistance and Waterproof solvent free single component
water based adhesive dispersion system in class D3 as per DIN EN 204 standard. HAMMER SPEED Plywood & Laminate surfaces should be While applying HAMMER SPEED on Ply, Laminate Surface

is suitable for high moisture prone areas where a high resistance to humidity is required. It is ideal free of dust, wax & stickers. Preferably make sure the deposition is sufficient and uniform.
for wood working process in Hot Press / Roller Press / Cold Press / Vacuum Press / Post Form the surfaces to be glued, should be
Both Surfaces should be clean, dry and free from any
Machine Applications. sanded and cleaned with cloth.
kind of grease, dust and oil.

Stir the contents of the glue container Frequent pressure must be applied in vertical
just before application & spread the glue applications.
Features & Benefits:
uniformly with a plastic notch spreader,
first on the laminate (non porous surface)
High Strength Heat Resistance & Waterproof Adhesive
& then on plywood (porous surface). General Instructions/Precautions for Uses:
Excellent rate of bond strength development

Excellent coverage Once the tack is formed & the film turns

Fast setting period of less than 2 hours transparent, paste the surfaces properly. Store awy from direct heat and sunlight
Bring the laminate in contact to HAMMER Skin Formation, If any should be removed before use
SPEED coated ply surface and make proper
Areas of Application: Stir the content of the container well before use
alignment.
Water should not be added for dilution as it may
Laminate to Plywood/Waterproof Plywood adversely affect the performance of the product

Veneer to Plywood/Waterproof Plywood

General Wood working Joinery Applications

Assembling of Frame Wood, Laminating of Panel Boards

Uses where high resistance to humidity in h igh moisture prone areas is required Press the laminated portion by using wet

Laminate/Veneer pasting in Hot Press/Roller Press/Cold Press/Vacuum Press Applications squeezed cloth to remove air entraption.

Solid Wood to Wood bonding

Pack Size:

220 Kg in HDPE Barrel Apply masking tap on the edges & keep

50 Kg in HDPE White Drum under pressure. Handling strength is

20 Kg in White Bucket received with in 4-6 hours, so finishing
work can start. Full strength will be
10 Kg in White Bucket
achieved with in 24 hours. under room
5 Kg in White Bucket
temperature.