Page 10 - USM_MembershipBooklet

UNiCORN SPiT – Instructions For Safe Use GENERAL DIRECTIONS:
SHAKE WELL and test small area before use. Can be applied with a brush, foam
pad, or your hands! Dry time depends upon thickness of the application. Dry time is approximately 3 minutes to 48 hours (depending on material, technique, humidity and temperature) or until a chalky finish appears. UNiCORN SPiT® dries quickly. Use a spray bottle of water to keep product from drying out and to easily manipulate. Once dry, use FAMOWOOD GLAZE COAT or other non-water based coatings to protect and to add desired finish such as gloss, satin or matte. The finish you choose also enhances dimension.
LAMINATE USE:
1. Surface Prep: Clean surface with degreasing agent then rinse removing any residue. Sand cleaned surface lightly with 220 sandpaper to remove any gloss. Clean all sanding dust and allow to dry. A base coat of paint is not required.
2. Apply UNiCORN SPiT in an array of techniques.
3. Sealing: We recommend sealing countertops with an epoxy / resin, such as Famowood Glaze Coat. For other surfaces other than countertops, feel free to seal with your choice of non-water based topcoats.
GLASS USE:
1. Surface Prep: Clean and remove all debris and clean with a degreasing agent. Rinse off all residue.
2. For a solid/non-transparent color apply directly to glass. For translucent results (stained-glass style) mix 1 part UNiCORN SPiT with 4 parts WATER-BASED decoupage before applying to glass.
3. Apply mixture directly to glass and let cure completely.
4.To add durability to the exterior of regularly handled items, spray a light, OIL-BASED clear coat over project and let dry.
FABRIC USE:
STAMPING METHOD: Use UNiCORN SPiT full strength for “stamping” (creating design on a separate surface and then “stamping” it on to a fabric project). Then, use a water bottle and your hand or brush to blend.
DIRECT TO FABRIC PROJECTS: Mix UNiCORN SPiT with 3-7 parts water in a spray bottle or cup and brush it on, drip it on or spray it on. Protecting your finished project: Use a NON-WATER-BASED product intended for waterproofing fabric after UNiCORN SPiT has completely dried.