Page 4 - SSW-1T-FRF104G-PCL-WSPROC

WEAPON SYSTEM CONFIGURATION WEAPON SYSTEM PROCEDURES
NASARR F­15 RADAR CHECKS (Engine must be running)
TIPS/CENTERLINE/PYLON WPN UNLOADING GROUND MAPPING MODE
1. Aircraft configuration panel – ON (Shift+2) 1. Radar mode control – set on GMP
2. Selected station prompt – PRESS 2. Radar range – set as desired
3. Selected station prompt check white AIR­TO­AIR MODE
4. Aircraft configuration panel – OFF (Shift+2) 1. Radar mode control – set on AA

2. Radar range – set as desired
CAMERA OPERATIONS (RF­104G)
WEAPON SYSTEM PROCEDURES 1. Camera power switch ­ ON
2. Frame rate selector switch – as requested
OPTICAL SIGHT CHECKS 3. Window cover indicator light – check ON
1. EPU switch ­ ON 4. MASTER ARMT/CAM – CAM or OFF
2. Optical sight switch ­ ON When requested:
3. Requested depression(mils) ­ SET 5. Stick grip trigger switch – depress
4. Reticle light intensity knob – SET as desired
5. Optical sight switch – set as desired CAMERA OPERATIONS (MAP/CONSORTIUM WITH POD)
6. EPU switch – set as desired
1. Camera power switch ­ ON
2. Frame rate selector switch – as requested
GROUND SPEED ERROR READOUT CHECKS 3. Camera vert/left/right select as requested
1. EPU switch – ON 4. Window cover indicator light – check ON
2. Ground speed – set as requested 5. MASTER ARMT/CAM – CAM or OFF
3. GSE readout power switch ­ ON When requested:
4. GSE readout needle – check proper indications 6. Stick grip trigger switch – depress
5. GSE readout power switch ­ OFF Note
6. EPU switch – set as desired Up to 3 views: vertical, left and right cameras may appear on
screen when camera power switch is set ON, since a
significant frame rate drop will be experienced it is
advisable to keep camera ON as minimum as possible.
Camera shutter continues to operate at selected rate until
trigger is maintained depressed, screen shots will be saved
on: \Users\<User>\Pictures\Flight Simulator X Files
Each camera is loaded with 100 frames

5 6