Page 105 - 2022-23 Auto Performance Drag Racing

Feeler Gauges
Use in engine assembly to check con-
necting rod side clearance, piston ring
end gap, spark plug gap, and valve lash. Gauges have Metric and SAE sizing designa- tions etched in each blade. Choose straight or angled sets.
ALL96420
DRAG RACING
Spark Plug Gap Tool Kit
ALL96516
Spark plug gap tool quickly and accu- rately gaps 14mm threaded spark plugs. Thread spark plug into tool, place the correct size feeler gauge beneath the ground strap, then tighten knob to set plug gap. Includes 17 different feeler gauge sizes .010" thru .035".
Port and Polish Kit ALL11052
Kit includes an assortment of 60,
80, and 120-grit cartridge rolls for cleaning and modifying intake and exhaust ports to match gaskets, remove casting marks, and for smooth- ing out runners. Two 1/4" mandrels are included with each kit.
Dykem Layout Fluid ALL12070
Apply layout fluid to the work surface to enhance visibility of scribes during fabrication. Blue fluid dries in minutes to a uniform, thin film without cracking or chipping. 4-oz. container has a built- in brush under cap. Not intended for use in set up of ring and pinion gear sets.
Flywheel Locking Tool SB/BB Chevy ALL96426
Place flywheel locking tool onto rear block
dowel pins to prevent the flywheel from turning
while tightening or loosening balancer bolts, flywheel bolts, clutch/pressure plate bolts, or cam gear bolts. Locking tool works with 153- or 168-tooth flywheels and flexplates.
SB Chevy Crank Socket ALL96424
Steel socket for rotating the crankshaft dur- ing engine assembly features a 1" hex and a 1/2" ratchet drive.
Compression Tester ALL96520
Tester checks cylinder compression
from 0 to 300 PSI and features an
air-hold valve to reset gauge. One-piece stepped brass end fitting with O-rings
fits 14mm and 18mm spark plug threads. Easy-to-read 2-1/2" dial is encased in a metal housing, surrounded by an anti- shock rubber cover. A quick-release coupler connects the included 12" flexible hose to the gauge.
Pilot Bushing Install Tool ALL26115
Driver simplifies installation of pilot
bushings or bearings for manual transmissions including Muncie, Saginaw, BorgWarner, T-10, and many other popular transmissions with .590" pilot shafts.
Tools & Pit Equipment
Part No. Description
Valve Lash Wrenches
ALL96401
ALL96420
Straight
ALL96421
Angled
Allstar valve lash wrenches save
precious time and eliminate fumbling with two separate wrenches. Available for Jesel, T&D, and other poly-lock style rocker assemblies.
Part No.
Remote Starter Switch Kit ALL76205
Description
ALL96400
7/16" Box Wrench, 1/8" Allen Wrench, Jesel Assemblies
ALL96401
1/2" Box Wrench, 3/16" Allen Wrench, T&D Assemblies
ALL96402
9/16" Box Wrench, 3/16" and 7/32" Allen Wrenches
ALL96403
5/8" Box Wrench, 3/16" and 7/32" Allen Wrenches
Kit includes a low-profile,
steel- cased foot pedal with
8' cord and assorted wire
ends to work with many
applications. Provides hands-
free engine cranking when adjusting valves.
Remote Starter Button ALL76206
Kit is very helpful for valve lash mainte- nance when the ignition panel can’t be reached. Leads are 60" long and come complete with gator clamps to connect to starter solenoid.
Spark Plug Index Shims
ALL96505
Stackable shims index spark
plugs at 30° intervals up to
360° properly positioning ground
strap in cylinder head for increased
power and clearance between spark plug and piston. Shims are intended for use with 14mm flat seat spark plugs only. Package of 24 shims contains 12 silver 60°, 12 black 90°, detailed instructions, and dial chart.
Part No. Description
ALL96505
Shim Kit, Standard O.D. (.800")
ALL96506
Shim Kit, Small O.D. (.720")*
*Shims are designed for close tolerance spark plug pockets such as those on ALL-PRO cylinder heads.
Spark Plug Gap Tool ALL96515
Used to set consistent plug gap. Insert plug into holder, then put feeler gauge between ground strap and electrode. Gently turn knurled knob until feeler gauge is snug.
ALL96515
103
2022-23