Page 13 - 2022-23 Auto Performance Drag Racing

GM Rear Brake Rotor ALL42095
Hat-style brake rotor with 5 on 4-3/4" pattern can be used with ALL42180 and ALL42181 7.5" metric caliper brackets and stock-type axles. 11-5/8" vented rotor is .790" thick and has a 2.800" I.D. center indexing hole to work with most metric style axle flanges with a maxi- mum O.D. of 6".
40 Vane Directional Rotors
Heavy-duty 40-vane brake rotors provide added strength and cooling over standard 36-vane rotors. 11.75" x 1.25" 8 bolt rotors weigh just
11 pounds and have ball-milled slots to keep rotor clean.
Part No.
36 Vane Directional Rotors
Rotors have 36 directional cooling vanes and are 1-1/4" thick x 11-3/4" diameter. Directional cooling vanes allow brakes to run much cooler than conventional rotor designs. Rotors fit solid mounting brake hats or hubs.
Mustang II Caliper Brackets
Install 11" Granada-style rotors and GM Metric-style calipers on stock height or low- ered Mustang II spindles with these bolt-on caliper brackets. Lightweight steel brackets weigh just over one pound each and are sold individually.
Part No. Description
Hybrid Mustang II Caliper Brackets
Install smaller hybrid-style rotors and interme- diate GM Metric-style calipers on stock height or lowered Mustang II spindles with these bolt-on caliper brackets. Lightweight steel brackets weigh just one pound each and are sold individually.
ALL42111
ALL42118
DRAG RACING
Brake
ALL42110
LH Caliper Bracket
ALL42111
RH Caliper Bracket
Description
ALL42004
LH 1.25" x 11.75" 8-Bolt
ALL42005
RH 1.25" x 11.75" 8-Bolt
ALL42004
Part No.
Description
ALL42118
LH Hybrid Caliper Bracket
ALL42119
RH Hybrid Caliper Bracket
Part No.
Rotor Bolt Kit ALL42026
Description
GM 7.5" Rear Caliper Brackets
Steel bolt-on brack- ets are used when converting drum brake-equipped 7.5" GM style
ALL42180 ALL42181
ALL42000
LH 1.25" x 11.75" 8-Bolt
ALL42001
RH 1.25" x 11.75" 8-Bolt
Grade 5, 5/16" bolts fasten disc brake rotors to rotor hat or hub. Includes ten bolts, ten washers, and ten self-locking nuts.
rear ends to disc
brakes. 1/4" thick
brackets replace the drum brake backing plates to provide secure mounting for standard intermediate metric calipers (ALL42083 and ALL42084). Use with ALL42095 brake rotor.
Part No.
Related Parts
Rear Caliper Brackets
Description
ALL42180
LH Bracket
ALL42181
RH Bracket
ALL42083
RH GM Metric Brake Caliper
ALL42084
LH GM Metric Brake Caliper
ALL42095
GM Rear Brake Rotor
ALL42032
DOT Legal Brake Hose Kit
Stamped Steel Rotor Hat
ALL42120
Brake hat fits 8-bolt rotors with 7" bolt
circle mount. Made of stamped steel
with a 3" offset and drilled for 4-1/2",
4-3/4", and 5" bolt circles. Hat has
3.060" diameter centering hole and fits axle flanges with up to 5.75" diameter. Drilled for 1/2" wheel studs.
Cast Aluminum Rotor Hats
Cast aluminum hats are available in two offsets, fit 8-bolt rotors with 7" bolt circle mount, have a 3.060" diameter centering hole, and fit axle flanges with up to 6.050" diameter. Drilled for 1/2" studs.
Part No. Description
Made from 1/4" thick steel, brackets fit 3" diameter
axle housings and work with 11.75" diameter rotors. Avail- able for many setups.
Part No.
ALL42186
ALL42102
Description
Clamp-On Brackets
ALL42101
Big GM, 7" Spacing
ALL42103
GM Metric, 5-1/2" Spacing, Wide Clamp
ALL42185
GM Metric, 5-1/2" Spacing, Narrow Clamp
ALL42186
GM Metric, 5-1/2" Spacing, Narrow Clamp with Reinforcing Gussets
ALL42105
Wilwood Dynalite, 5-1/4" Spacing
ALL42109
Wilwood Superlite, 3-1/2" Spacing
Weld-On Brackets
ALL42100
Big GM Style, 7" Spacing
ALL42102
GM Metric, 5-1/2" Spacing
ALL42104
Wilwood Dynalite, 5-1/4" Spacing
ALL42108
Wilwood Superlite, 3-1/2" Spacing
ALL42129
ALL42129
2-1/2" Offset, 2.2 lbs.
ALL42128
3" Offset, 2.5 lbs.
11
2022-23