Page 208 - 2022-23 Auto Performance Drag Racing

Stainless Steel Oil Pan Stud Kits
DRAG RACING
Studs hold gasket in place, easing oil pan installation and
Accusump Electric Pressure Control Valving
The convenience of an electric valve with the rapid refill of a manual valve. The Accusump will discharge oil when oil pressure drops below the pre-set rating and only refill when the pressure rises above the setting. Includes regula- tor, toggle switch, and hardware.
Part No.
Billet Sandwich Adapters
alignment.
Part No.
Description
CAN22-300
SB Chevy/Olds
CAN22-302
GM LS1/LS6
CAN22-310
BB Chevy/Pontiac/Chrysler
CAN22-360
SB Ford 302-351W/351C/BB Ford 429-460
Universal Dipstick Kit CAN20-850
CAN24-271X
Description
CAN22-310
CAN24-271X
E.P.C. Valving Kit, 20-25 PSI Discharge/Refill
CAN24-271XK
E.P.C. Valving Upgrade Kit, Converts CAN24-270X to CAN24-271X Specs.
CAN24-273X
E.P.C. Valving Kit, 35-40 PSI Discharge/Refill
Designed for use with Canton 13-000, 15-000, 16-000, and 18-000 series oil pans with a port to accept a universal dip- stick. Dipsticks must be bent and
calibrated for each application.
Windage Trays
CAN20-931
Billet aluminum adapter allows accommodat- ing an Accusump or remote oil cooler, and retains original oil filter in the stock location. Adapter has (2) 1/2" NPT ports and lowers the stock filter approximately 1-1/2".
Louvered and screen type,
stamped steel trays keep oil off of the rotating assembly and in the sump where it belongs. Available for most applica- tions. Mounting kit must be purchased separately.
CAN22-550
Description
Windage Tray
Mounting Kit
Part No.
*Replaces OEM bypass adapter.
Chevy Oil Filter Block-Off and Input Adapters
Description
CAN22-550*
SB Chevy Sandwich Adapter
CAN22-560*
BB Chevy Mark IV Sandwich Adapter
CAN22-569
Universal Sandwich Adapter, 22mm-1.5, for 2-5/8" Filter Gasket O.D. NEW!
SB Chevy Pro Plus Louvered Windage Tray
CAN20-908
CAN20-921
SB Chevy Full-Length Windage Tray Screen, RH Dipstick
CAN20-911
CAN20-920
BB Chevy Short Style Windage Tray Screen
CAN20-916
CAN20-926
SB Ford 289-302 Windage Tray Screen, Rear Sump
CAN20-930
CAN20-940
SB Ford 289-302 Windage Tray Screen, Front Sump
CAN20-931
CAN20-940
SB Ford 351W Windage Tray Screen, Rear Sump
CAN20-932
CAN20-942
BB Ford 429-460
Windage Tray Screen, Front and Rear Sump
CAN20-936
CAN20-946
BB Ford 332-428 “FE” Windage Tray Screen, Front Sump
CAN20-938*
N/A
Ford 4.6/5.4L Modular Windage Tray Screen
CAN20-939*
N/A
Pontiac 301-455 Windage Tray Screen
CAN20-918*
N/A
*Installs between block and oil pan
Chevy High-Pressure Oil Pump Springs
Higher pressure bypass springs force more oil through the engine.
Required when using a dry sump
or external pump wet sump oiling system, adapters bolt into the stock bypass mounting holes.
CAN22-520
Part No.
Description
CAN22-520
SB Chevy, BB Chevy Mark IV
CAN22-584
BB Chevy Mark V
Part No.
Description
CAN22-150
Chevy Oil Bypass Eliminator
CAN22-570
Replaces stock oil bypass mount and eliminates the possibility of unfiltered oil entering the engine.
CAN22-150
SB Chevy, 40-65 PSI
CAN22-180
BB Chevy, 50-75 PSI
CAN22-190
BB Chevy, 60-85 PSI
AccusumpTM Oil Accumulators
CAN24-006
Main Cap Support Girdles
Accumulators provide extra
protection from loss of
oil pressure and prevent
unnecessary wear on initial start-up. The 4-1/4" diameter alu- minum tube is roller burnished and PTFE hard-coated inside with a double O-ring piston, screw-in aluminum end caps, air pressure gauge, air pre-charge, and safety blow-off valves. Available in two-and-three quart capacities. Mounting clamps and control valve must be ordered separately.
Part No. Description
Laser-cut, chrome moly steel
girdles tie all five main caps
together to strengthen the
bottom end of popular Ford V8’s. Girdles clear large strokers and don’t require machining, bushings or spacers to mount. Hardware included. Louvered steel windage trays for use with main cap girdles are also available.
Application Main Cap Support Girdle Windage Tray
CAN21-060
SB Ford 289-302
CAN21-060
CAN20-960
SB Ford 351W
CAN21-062
CAN20-962
BB Ford 429-460
CAN21-066
CAN20-966
Oil Accumulators
CAN24-006
3 Qt. Capacity, 16" L. Accusump
CAN24-026
2 Qt. Capacity, 12" L. Accusump
Oil Accumulator Accessories
CAN24-200
Accusump Stainless Steel Mounting Clamps
CAN24-260
Manual Control Valve Kit, 1/2"NPT
CAN24-270X
Electric Control Valve Kit, 1/2"NPT, Street or Pre-Oiling Only
CAN24-280
Check Valve, 1/2"NPT, Ensures Oil Is Directed to Bearings
CAN24-295
LED Indicator Light Kit, Indicates Accusump Activation
CAN24-506
Manual Valve Remote 6' Cable Kit, Allows Driver’s Seat Activation
206
2022-23