Page 336 - 2022-23 Auto Performance Drag Racing
P. 336

                                 Ultimate LS Standalone ECU
DRAG RACING
 Standalone self-learning ECU
is the best solution for GM
LS swaps, replacing the OEM
computer and wiring harness.
Engineered for LS or similar
engines with crank and cam
sensors, the Ultimate LS
Standalone ECU will self-learn to most cam swaps and only very large cam grinds will require additional tuning. System is complete with a touch-screen controller to ease set-up and configuration. Choose from systems with or without transmission control. Includes 3 BAR MAP sensor for power adder applications with up to 30 PSI of boost.
Part No. Description
Note: System is not compatible with drive-by-wire throttle bodies or VVT (variable valve timing). Modifications must be performed to remove these functions.
GM LS 102mm Throttle Body FIT70062 NEW!
Cable-driven GM LS 102mm throttle- body is a direct bolt-in replacement for the OEM four-bolt unit. Ready to install, complete with the OEM TPS and MAP sensors. Black powder-coat- ed aluminum throttle body fits most 1997-2019 GM LS V-8's.
LS Throttle Cable Bracket FIT70063
A simple, clean solution to managing throttle cable connection to FiTech LS throttle bodies.
SB Chevy Ultra Ram EFI 600 HP System FIT38301
Self-tuning induction system
includes everything needed to
convert a carbureted small block Chevy to a top-of-the-line, self- learning EFI system. Engineered
for engines with up to 600 horse- power, system is complete with intake manifold, ECM, wiring harness, and necessary hardware.
SB Chevy Go Port 550 EFI System FIT37854
Designed for
small block
Chevys with up
to 550 horse-
power, system
combines the
easy installation
of throttle body
EFI with the
precision fuel distribution of port-style EFI. System features a high-flow throttle body with the ECU directly mounted, and a high-performance Edelbrock intake manifold.
Go EFI 2X4 1200HP Kit FIT30064
The Go EFI 2X4 1200 HP (Power
Adder) is for 671-871 Roots
Superchargers or make up to
1200 HP on a naturally aspirated
dual-quad setup. Bolts directly
on a 2X4 blower plate, cross
ram, or tunnel ram and can be
mounted inline or sideways without adapters. One throttle body handles the brains while the second holds four ad- ditional injectors plus the IAC motor for idle stability. Adjust fuel curves and set timing through a touch-screen controller. Matte black finish.
Go EFI 2 x 4 625 HP Kit
 FIT70050
  FIT70050
  Ultimate LS Standalone ECU, without Trans. Control
  FIT70051
 Ultimate LS Standalone ECU, with Trans. Control for 4L60/4L65/4L70/4L80
 This dual-quad EFI kit will directly
bolt-on to popular dual-quad mani-
folds. Can be used with cross ram
and tunnel ram configurations.
The system comes with eight
precise flow-matched injectors
capable of flowing 625 HP of fuel, two
die cast throttle bodies, a handheld controller, dual pressure regulator, MAP sensor, coolant sensor, TPS, coolant sensor, idle air control, O2 sensor and bung, -6AN fuel inlet fitting, and gasket kit.
Part No. Description
Meanstreet EFI – 800 HP FIT30008
Meanstreet offers an onboard ECU
and fuel pressure regulator to bring
the user simple, clean wiring, and
an easy install. The FiTech wide-
band 02 and Annular Swirl Wet
Flow technology to get the most
complete atomization available,
bringing the user more power than
ever. It fits any 4bbl. intake manifold
and is the most self-contained and full-featured unit of this type. The ECU (computer) is mounted on the throttle body, which greatly simplifies installation. No hole in your firewall and no unsightly harness draped across your engine. It also has a built-in fuel pressure regulator. A hand-held controller features a touch-screen for quick and easy initial set-up.
Go EFI 8 1200 HP Kit FIT30012
The Go EFI 8 1200 HP (Power
Adder Plus) is the ultimate
system for serious power.
This system is capable of
fueling 1200 HP. A touch-
screen controller makes use with
data-logging and pro-tuning software
quick and easy. Naturally aspirated or forced-induction racing applications. Matte black finish.
FIT30061
   FIT30061
  Bright Tumble Finish
  FIT30062
 Matte Black Finish
       334
2022-23
















   334   335   336   337   338