Page 339 - 2022-23 Auto Performance Drag Racing

DRAG RACING
Engineered specifically for 1965-70
Ford Mustangs that have an altered
suspension height, kit eases front
end alignment and corrects bump steer
issues, resulting in improved vehicle handling.
Includes adjustable outer tie rod ends with fully machined, billet 6061-T6 aluminum sleeves.
30" Straight Motorsports Column with Quick Disconnect FLAFR3310LCKT NEW!
Lightweight steering column
is 30" long and features a
collapsible design for added
safety. Manufactured from satin black
powder-coated 304 stainless steel, it includes
internal electronics for turn signals, four-way flashers and horn. Included billet aluminum quick-disconnect hub meets SFI 42.1 specifications.
Mil-Specification Universal Joints
Ideal for drag racing chassis, lightweight universal joints include a lubricant-filled silicone boot for longevity
and maintenance-free operation.
Note: Not for street use. Total vehicle weight with driver not to exceed 3,500 lbs.
“Double D” 3/4" O.D. Steering Shafts
1965-70 Ford Mustang Bump Steer Kit FLAFR1619MU NEW!
Forged True Universal Joint FLAFR2644 NEW!
Designed specifically for performance applica- tions, Forged True U-joint may be welded and pinned where required by sanctioning bodies. U-joint has 3/4" DD x 3/4" DD fitment.
Billet-Joint Steering Universal Joints
Joints are CNC-machined from steel billet for strength, and then zinc coated for corrosion resistance. Sealed needle bear- ings provide superb steering without backlash.
Part No.
Box/ Column
Box/Column Application
Steering Shaft
Steering Shaft Application
FLAFR1700
3/4"
Universal
3/4"
Universal
FLAFR1701
9/16"-26
Mustang II/Pinto Manual
3/4"
Universal
FLAFR1702
3/4"-36
Mustang II/Pinto Power/ Ford Box
3/4"
Universal
FLAFR1704
5/8"-36
Vega/1979-Up GM Rack
3/4"
Universal
FLAFR1705
1"-48
Universal
3/4"
Universal
FLAFR1706DD
3/4" DD
Universal
3/4" DD
Sm. GM/Sm. Ford
FLAFR1707DD
1" DD
Universal
3/4"
Universal
FLAFR1709DD
9/16"-26
Mustang II/Pinto Manual
3/4" DD
Sm. GM/Sm. Ford
FLAFR1711
3/4"-36
Mustang II/Pinto Power/ Ford Box
3/4"-36
Sm. Spline GM
FLAFR1712DD
1"-48
Universal
3/4" DD
Sm. GM/Sm. Ford
FLAFR1714DD
1" DD
Universal
3/4"-36
Sm. Spline GM
FLAFR1715DD
3/4"-36
Mustang II/Pinto Power/ Ford Box
3/4" DD
Sm. GM/Sm. Ford
FLAFR1716DD
3/4" DD
Universal
3/4" DD
Sm. GM/Sm. Ford
FLAFR1717DD
1" DD
Universal
3/4" DD
Sm. GM/Sm. Ford
FLAFR1719DD
13/16"-36
GM Model 800 Power, Up to 1977
3/4" DD
Sm. GM/Sm. Ford
FLAFR1722DD
5/8"-36
Vega/1979-Up GM Rack
3/4" DD
Sm. GM/Sm. Ford
FLAFR1726
5/8"-36
Vega/1979-Up GM Rack
3/4"-36
Sm. Spline GM
FLAFR1733DD
3/4"-30
Most GM/Corvette
3/4" DD
Sm. GM/Sm. Ford
Part No.
Nominal Size O.D.
O.D. “A”
I.D. “G”
Max Dia. “J”
Length “B”
“C”
“D”
FLAFR1800B12
3/4"
.745"
.625"
1-1/32"
1-3/16"
7/8"
15/16"
FLAFR1800B14
7/8"
.870"
.750"
1-1/2"
3-5/8"
1"
1-1/16"
Round 3/4" O.D. “Double D”
steel shafts have two flats to
retain the steering joint. Two
indents must be drilled for set screw retention.
Part No. Description Splined 3/4"-36 Steering Shafts
Steering shafts are splined on both ends and made from pre-ground alloy steel. Available in 2" incre- ments from 4" to 16".
Part No. Shaft
Steering Column Support Bearings
Highly recommended when a double univer-
sal joint or vibration dampener is being used. Bearing may be used with splined or “DD” steering shafts.
Battery Relocation Kit FLAFR1063 NEW!
Updated kit helps improve weight distribution by relocat- ing the battery to the trunk. Kit includes 20' of red 2-gauge positive cable, 8' of black 2-gauge ground cable, (2) battery terminals, (6) heavy-duty copper cable ends,
(6) heat-shrink sleeves, (12) cable clamps
with sheet metal screws, and (12) plastic
cable ties. Cable features ultra-fine 100%
copper conductor strands for low resis-
tance and flexibility.
The Light FLAFR1001
The Light offers hassle-free timing. Self-
powered timing light uses 2 D-cell batteries
to eliminate cumbersome battery leads.
Convenient single-wire inductive pickup and
brilliant Xenon bulb clearly illuminate timing marks, even in direct sunlight. Lens area is surrounded by an impact-absorb- ing, flexible rubber guard.
Magneto and Battery Safety Kill Switch
Flaming River’s battery disconnect and combination magneto/battery disconnect switches meet all applica- ble NHRA/IHRA regulations including SFI spec. 8.4 for magneto/battery
shutdown. FLAFR1003-2 Part No. Description
Cross-Section
FLAFR1850
18" DD Unplated
FLAFR1851
36" DD Unplated
FLAFR1870-4
4"
FLAFR1870-8
8"
FLAFR1870-12
12"
FLAFR1003-2
Kill Switch and Lever Kit
FLAFR1006
Lever Kit 18" Long
FLAFR1010
Magneto/Battery Kill Switch
FLAFR1013
Battery and Alternator Kill Switch
Part No. Description
FLAFR1810
Zinc-Plated Steel 3/4" Support Bearing
FLAFR1811
Stainless Steel 3/4" Support Bearing
337
2022-23