Page 351 - 2022-23 Auto Performance Drag Racing

9mm Spark Plug Wire Sets
DRAG RACING
Wire wound core provides low resistance
and minimal spark loss. Silicone insulation and FRDM12259-C301 boots protect wire from high temperatures,
fuel, oil and solvents. Choice of blue, red or black.
High Flow Rate Fuel Injector Kits FRDM9593-LU24A
Kits contain eight high flow rate fuel injectors en- gineered for race use. Injectors work best with air me- ters that have been recalibrated. For use with Hi-Flow mass air sensors only.
Desc. Blue Red
Black
Part No.
Dual Fuel Pump Kit
FRDM9407-GT05
Flow Rate
Connector
4.6L 2V Mustang
FRDM12259-C462
FRDM12259-R462
—
302-351W, 45° Boots
FRDM12259-C301
FRDM12259-R301
FRDM12259-M301
429-460, 45° Boots
FRDM12259-C460
FRDM12259-R460
—
Universal, 45° Boots
FRDM12259-C302
—
FRDM12259-M302
FRDM9593-LU24A
24 Lbs./Hr.
USCAR
FRDM9593-LU60
60 Lbs./Hr.
USCAR
FRDM9593-LU80
80 Lbs./Hr.
USCAR
Performance Improvement Intake Manifold for 4.6L FRDM9424-P46
Current production plastic intake mani- fold, used on 2001-04 Mustang 4.6L 2V SOHC, fits 1999-04 “PI” head ports and may also be used on 1996-98 engines with “PI” cylinder heads. More cost effective than traditional aftermarket performance intake manifolds.
289-302 Intake Manifold FRDM9424-F302 NEW!
Dual-plane intake manifold pro- vides improved horsepower and torque in the 1500-6000 RPM range to street or mild drag race applications. Accepts a standard, square-bore 4bbl. carburetor. NOTE: Does not fit "Z", "Z2" or GT-40 "X" heads.
GT350 87mm Throttle Body FRDM9926-M52
NEW!
Stock replacement, 2015-20 GT350 5.2L 87mm.
Oil/Air Separator for 2018-19 Mustang GT 5.0L
FRDM6766-A50
A must for racing applications,
precision-molded canister
separates oil vapor from air
in the PCV system, preventing
contamination of the intake tract.
Easily drained. Fits all 2018-19 Mustang GT 5.0L and 2019 Mustang Bullitt.
Recommended for
applications with
over 400 horsepow-
er, kit is designed
to fit 2005-09 Mustang GT
and includes dual fuel pumps,
drop-in housing, fuel pump driver
module, and wiring harness from 2007-09 Shelby GT500. Calibration required.
Note: Use of this kit in a 2010 Mustang will result in an incorrect fuel gauge reading.
High-Torque Mini Starter
FRDM11000-B51
Designed for small block Ford 289-
351W and 351C engines, mini starter provides increased header clearance when compared to pre-1989 units, yet offers more cranking power. Starter weighs 5 lbs. less than early units and is sold complete with battery cables and instructions.
Note: Must use diode-protected fenderwell solenoid.
Starter Index Plate for 1979-95 5.0L
FRDM7007-B
Replacement starter index plate, which
installs between the block and the transmission bellhousing, fits all 1979-95 Mustang V8 with manual transmission. Plate helps position
the starter and ensure proper alignment.
EFI Heat Spacers
Phenolic heat spacers fit between upper and lower manifold to pro- vide superior heat dissipation and improved performance. Complete with longer fasteners.
Part No. Description
Flywheels
Ford Racing has both stock replacement and SFI ap- proved flywheels available.
Part No.
Roller Pilot Bearings
Production type roller pilot bearings
are pre-greased.
Part No.
FRDM6375-B302 Description
FRDM6379-B
FRDM4216-A210
Flywheel Bolts (10), M/T Only, All Pushrod V8 Engines
FRDM6375-A302B
Pre-1981 302/351 Engines with 157T Flywheels. Billet Steel, SFI App.
FRDM6375-B302
1981-Up 302 Engines, Cast Iron, Stock Replacement
FRDM6375-D302B
Small Block, 157T Flywheel, 0-Balance, Billet Steel, SFI App.
FRDM6375-N427
1965-Up 360, 390, 427 “FE" Engines, 184T, Billet Steel, SFI App.
FRDM6379-B
Flywheel Bolts (8), M/T Only, All 4.6L Modular Engines
FRDM9486-A51
FRDM9486-A51
Stock 5.0L Manifold, 1/2" Thick
FRDM9486-A52
GT-40 Manifold, 1/2" Thick
FRDM9486-A53*
GT-40 Manifold, 1" Thick
*Thick spacer allows clearance for use with FRDM6582-E302 valve covers.
EFI Upper-to-Lower Intake Manifold Gasket FRDM9486-A50
Required to assemble Ford Racing upper intake manifold to the lower intake manifold.
FRDM7600-A
Description
FRDM7600-A
SB Ford 289/302/351W/351C
FRDM7600-B
Ford Modular 4.6L
349
2022-23