Page 353 - 2022-23 Auto Performance Drag Racing

8.8" Traction-Lok Differential FRDM4204-F318C
Limited slip differential provides increased traction and performance to vehicles using popular 8.8" rears. Differential is compatible with solid or independent rear suspension and accepts 31-spline axles.
Note: Requires 4-oz. of FRDM19546-A12 Friction Modifier with initial fill.
8.8" Traction-Lok Rebuild Kits
Kits contain clutch pack, shims, friction modifier (FRDM4700-B only), and instructions to rebuild 8.8"
Traction-Lok differentials.
DRAG RACING
8.8" Axle Installation Kit
FRDM4050-B
Kit aids in the installation of 8.8" rears into 1979-04 non-IRS Mustangs. Includes (2) control arm bushings, (2) C-clips, and (1) bottle of friction modifier.
Axle Girdle Covers
Rigid 356-T6 aluminum cover, which replaces the OEM differential cover, includes load bolts that provide added support to the carrier bearing caps
to improve durability while increasing
Choose from kits with standard or carbon fiber clutch pack, common to 2003-12 Mustang SVT.
Part No.
FRDM4700-B
ring and pinion life.
Part No.
Hood Latch and Pin Kit
FRDM16700-A
Similar to the kit used
on early Mustangs and Fairlanes, hood latch
and pin kit may be used on OEM or aftermarket hoods. Not designed to fit 2005-up Mustangs.
FRDM4033-G2 Description
FRDM4033-G2
1986-14 Mustang GT/2007-14 Shelby GT500, 8.8" Axle
FRDM4033-G3
1999-04 Mustang Cobra, IRS Only
Super 8.8" IRS 4.09 Ring and Pinion Set FRDM4209-88409A NEW!
Increase off-the-line accelera-
tion in 2015-2020 Mustangs
with the 4.09 ring and pinion
set for Super 8.8 IRS center
sections. Sold complete with
crush sleeve and pinion nut.
NOTES: Requires FRDM4210-B3 ring and
pinion installation kit. 3.15 ratio differential is not compatible with 3.31, 3.55, 3.73 and 4.09 ratio gears; use differential FRDM4204-MT or FRDM4204-M.
Mustang Gauge Pod FRDM6304GPOD-A
Mount add-on gauges into the dash of 2005-14 Mus- tang GT, Shelby GT500, and Mustang V6 easily, while maintaining
an OEM appearance.
Gauge pod accepts
standard 2-1/16" dia.
gauges and is sold complete with dash mounting bracket.
Description
FRDM4700-B
8.8" Traction-Lok Rebuild Kit, Standard Clutches
FRDM4700-C
8.8" Traction-Lok Rebuild Kit, Carbon Fiber Clutches, 2003- 12 Mustang SVT
8.8" Ring and Pinion Gear Sets
Sets fit all 8.8" Mustang, LSC, and
T-Bird axles.
Part No.
8.8" Ring and Pinion
Installation Kits
Description
FRDM4209-88355
FRDM4209-88355
3.55:1 Ratio
FRDM4209-88373
3.73:1 Ratio
FRDM4209-88410
4.10:1 Ratio
Comprehensive installation kits
are required for 8.8" ring and
pinion installations. Shim kits
include carrier and pinion shims,
ring gear bolts, crush sleeve,
pinion nut, and pinion seal. Shim
and bearing kits include pinion and carrier bearings, and gear marking compound.
Part No. Description
FRDM4210-A
FRDM4210-A
Shim Kit, IRS Applications
FRDM4210-C3
Shim and Bearing Kit, 1986-04 8.8" Exc. IRS
FRDM4413-B
Inner Stub Shaft Bearing and Seal Kit, 2015-18 Mustang Super 8.8" IRS
351
2022-23