Page 43 - 2022-23 Auto Performance Drag Racing

Coil Wire Kits
Kit includes 36" of 8mm spiral core race wire, ends, connectors, and wire strip- ping/crimp tool.
Part No. Description
Spark Plug Race Wire Sets
Custom length SBC wire sets feature 8mm spiral core race wire with pre- terminated ends and universal coil wire. Sets feature shrink sleeved ends and cylinder identification numbers.
Part No. Description
SB Chevy Spark Plug Wire Loom Set ALL81340
Polished aluminum spark plug wire loom fits wires up to 9.5mm. Includes mounting hardware. Engines with center bolt style valve covers require ALL81341 mounting kit. Package of 2. Note: may not clear oil dipstick or exhaust manifolds on some later model engines with “log” style manifolds.
Part No. Description
Related Item
ALL81341 Mounting Kit for Centerbolt Covers Spark Plug Wire Separator Set
ALL81345
Black plastic set will fit up to 9mm wires. Includes two of each 2-, 3- and 4-wire separators.
Spark Plug Wire Retainer ALL81350
No more melted plug wires from hot
exhaust. These aluminum retainers will
neatly mount separated 4-wire sets to the front or rear of cylinder head. Package of 2.
SB Chevy Rear Main Seal Adapters
DRAG RACING
Spark Plug Boot Sleeves
Fiberglass braided sleeves are heat resistant to protect spark plug boots from header heat up to 1,200°F. 7-1/2" long sleeves slide over a variety of boots.
Electrical, Gauges & Ignition
ALL81380
Kit without Sleeving
ALL81381
Kit with Sleeving
ALL34272
Natural, 8-Pack
ALL34273
Natural, 2-Pack
ALL34274
Black, 8-Pack
ALL34275
Black, 2-Pack
Part No.
Description
ALL81365
Set without Sleeving, Under Header
ALL81366
Set without Sleeving, Over Valve Cover
ALL81370
Set with Sleeving, Under Header
ALL81371
Set with Sleeving, Over Valve Cover
Universal Spark Plug Race Wire Sets
Universal length 8mm spiral core wire sets include a non- terminated end, ends and boots for a build to length option.
ALL81341
Part No.
Engine
LS Oil Pan Kits
Description
ALL81360
Set with 90° HEI Ends
ALL81361
Set with 135° HEI Ends
Oil pan kits ease the installa-
tion of LS series engines into
early production vehicles by
providing additional clear-
ance between the oil pan
and frame crossmember.
Kits include oil pan, pick-up tube, gaskets and mount-
ing hardware required for installation. Fabricated oil pan does not accept factory style oil filter, pan features -10AN oil filter fittings and will require an external oil filter mount.
Note: These kits may not fit all applications, additional motor mount adapters and pos- sible frame modification may be required for installation in some vehicles.
Part No. Description
Magnetic Drain Plug ALL87040
Replacement plug for standard 1/2"-20 drain holes has a magnetic end to capture small particles in oil or to help identify a problem early.
Billet aluminum adapter
allows installation of a
two-piece style crank-
shaft seal and early
(pre-1986) crankshaft
into a 1986 and newer SB
Chevy (pre-LS) engine. Adapters include mounting hardware. Alignment tool ALL26127 (sold separately), is recommended to ensure proper installation and centering of adapter plate.
Part No. Description
Balancing Plate ALL26120
Install between crankshaft flange and flexplate to use a Chevy 350 flexplate or flywheel with a 400 crank.
Plastigage® Kit ALL96475
Plastigage strings are a simple and accurate way to verify crankshaft, main and rod bearing clearances. Kit includes two green .001"
to .003" and one red .002" to .006"
(12" long strings) individually pack- aged inside calibrated sleeves. Detailed instructions are included.
ALL26240
ALL26125
ALL26126
ALL26127
ALL26125
Seal Adapter for Early (Pre-’86) Oil Pan
ALL26126
Seal Adapter for Late (86'-Up) Oil Pan
ALL26127
Alignment Tool
ALL26240
Cast Aluminum
ALL26241
Cast Aluminum Black
ALL34274
Fabricated Aluminum Pan
41
2022-23