Page 464 - 2022-23 Auto Performance Drag Racing

Pro-Clamp Separators MSD8843
DRAG RACING
Keeps plug wires neat and insulated from
sources of engine heat. Snap-together
separators sandwich wires in place. Two
4-wire, two 3-wire, and four 2-wire separators are included.
Pro-Crimp Tool II
A must for any tool box. Inter-
changeable jaws allow a variety of crimps with one heavy-duty tool. Hardened steel frame features molded hand grips. Tool includes precision crimping/stripping jaws for MSD spark plug wire terminals. Other dies are also offered.
Universal Ignition Tester MSD89981
Ignition tester can be used to test
traditional single coil ignitions or
coil-per-cylinder applications. User
can create an RPM run, allowing the
ignition to activate accessories like
shifters, nitrous selenoids, etc. Tester
features a large, easy to read display and has settings for most popular 4-, 6-, 8-, and 12-cylinder engines.
Single-Channel
Digital Ignition Tester MSD8998
Test functions of MSD single-chan-
nel ignitions, including the Digital-7
Programmable unit. Produces a simulated
trigger signal that fires the ignition. A spark
plug with a very large gap is included for clipping to the coil wire. May also be used to check tachometer and RPM limiter accuracy. Works with 4-, 6-, or 8-cylinder engines and simu- lates up to 16,000 RPM of operation.
High-Current Solid State Relay
High-current relay module may
be used to clean up electrical
wiring and may be used to
replace four standard relays. Each channel is capable of han- dling up to 35 amps of continuous current, providing up to 140 amps of power. May be used to control electric fans, wa- ter pumps, nitrous solenoids, etc. that would typically require a relay. Built-in LED status indicators ensure proper wiring and operation of each channel. Offered in red or black.
Part No. Description
SPST Relay with Socket Harness MSD89611
Waterproof SPST relay is rated at 30 amps. Ideal for use with electric water pumps, fans, fuel pumps, etc. Includes socket harness.
High Pressure Electric Fuel Pump MSD2225
Roller vane pump can stand
alone in multiport EFI’s or work
as a “booster” for nitrous oxide
systems. It mounts in-line, outside
of the fuel tank, and delivers 43
GPH @ 40 PSI, sufficient fuel flow for up to 500 horsepower. Pump has 3/8" inlet and 5/16" outlet nipples, and includes mounting clamps and hardware.
Part No.
Description
Part No.
Description
MSD35051
Pro-Crimp Tool II
MSD3508
Plug Wire Terminal Dies
MSD3506
Amp Pin Terminal Dies
MSD3509
Weathertight Terminal Dies
MSD3507
Amp Lug Terminal Dies
MSD3510
Deutsch Terminal Dies
Wire Separators
MSD8841
MSD’s wire separators keep plug wires away from hot exhaust, and each other, to prevent
inductive crossfire.
Part No.
Firewall Feed-Thru MSD8211
Description
MSD8841
Dual Plug Wire Separators, 8-8.5mm Wires
MSD8842
Dual Plug Wire Separators, Wires with Sleeve
Rynite and nylon feed-thru that has 1/2"
of insulation to insure that maximum spark
reaches the plugs and to prevent voltage leaks from cockpit- mounted coils. Mounts in a 1" diameter hole in the firewall.
Shrink Sleeving MSD3407
May be used to protect electrical con-
nections of any kind as well as seal-
ing spark plug boots to plug wires.
Simply install the sleeve in the desired area and apply heat. Sold in sets of 18.
Pro-Heat Guard MSD3411
Heat-resistant woven glass core
sleeve is coated with silicone rubber
to resist abrasion and temperatures
up to 1,000°F. Slides over most plug wire. Sold in 25' rolls.
Pro-Boot Guard MSD3412
Thick, woven fiberglass sleeve is coat- ed with silicone rubber and resists extreme temperatures. Sold in 6' roll.
Cylinder Markers MSD3414
Save time and ensure that the plug wires are installed correctly. Molded from plastic, they are available in 8.5mm size.
Shrink Sleeves with Cylinder Numbers MSD3415
Shrink sleeves are num-
bered 1-8 and slide over
the spark plug boot for a secure connection.
Spark Guard MSD8804
A dielectric grease that stops voltage leaks, eases boot removal, simplifies installation, prevents moisture buildup inside the spark plug wire boots, and protects against radio (RFI) noise. Will not
dry up or harden and retains its spark isolating capabilities indefinitely. Comes in .5-oz. tub.
MSD7564-HC
High-Current Solid State Relay Block, Red
MSD75643-HC
High-Current Solid State Relay Block, Black
462
2022-23