Page 521 - 2022-23 Auto Performance Drag Racing

DRAG RACING
Ultra 40 and Blue Max Coil Wire Kits
Blue Max Shrink Sleeves
Plain or numbered sets ease
wire identification and seal
between the boot and wire jacket to stop voltage loss.
GM HEI Advance Curve Kit
MOR72300
Recurves distributor for full spark advance at maximum RPM. Contains three sets of springs to adjust the rate of spark ad- vance from quick, to super quick, to ultra quick. Weights and center plates are stamped with smooth edges to eliminate erratic timing. Center plate eliminates over centering of the centrifugal weights. Fits all GM HEI distributors.
Distributor Gear Shim Kit
MOR26140
For distributors with 1/2" diame-
ter shaft. Kit includes two .010" shims, two .020" shims, and one .053" shim for precise distributor shaft end play adjust- ment. Improves timing accuracy and prevents gear wear.
Distributor Housing Shim Kit
MOR26150
Prevents oil pump bind and spark
scatter on Chevrolet V8 when heads or decks have been resurfaced. Kit includes one each .030", .060", and .100" high-impact nylon shims.
Distributor Hold-Down Clamps
Heavy-duty steel clamps securely retain the distributor and the stud prevents thread wear in the intake manifold.
Part No. Description Spark Plug Indexing Washers
Use with MOR62160 for all 14mm spark plugs with 5/8" hex. Set includes 30 washers in three thicknesses to correct the electrode placement on any plug, simplifying the time-con- suming task of spark plug indexing. Washers are stamped from copper for perfect sealing and heat transfer. Available for flat or taper seat plugs.
Description
Blue Part No.
Black Part No.
Blue Max Spiral Core Coil Wire Kit, Universal 36"
MOR73235
—
Ultra 40 Coil Wire Kit, Universal 72"
MOR73237
MOR73238
Ultra 40 Coil Wire Kit, Universal 72", Includes Sleeve Kit
MOR73240
—
Ultra 40 Coil Wire Kit, Universal 48", Includes Sleeve Kit
—
MOR73241
Part No.
Insulated Wire Sleeve
Description
MOR72020
Numbered Blue Shrink Sleeves, 16 Pcs.
MOR72030
Blue Shrink Sleeves, 18 Pcs.
MOR72031
Black Shrink Sleeves, 18 Pcs.
Capable of insulating up to 16,000 volts
without crossfiring, sleeve is a tube of
closely woven fiberglass covered with
high-voltage resistant silicone. The sleeve
should cover the entire length of the plug wires. Fits 7 and 8mm wire. Sold in 25' lengths.
Part No.
Description
MOR72000
Insulated Wire Sleeve, Blue
MOR72002
Insulated Wire Sleeve, Red
MOR72011
Insulated Wire Sleeve, Ultra 40 Blue
MOR72012
Insulated Wire Sleeve, Ultra 40 Black
MOR26200
Chevy V8, Gold Iridite
MOR26210
Chevy V8, Chrome
High-Temperature Boot Sleeves
Non-flammable boot sleeves protect up to 1,200°F. Sleeves are 1" ID, 5-3/4" long. Sold in pairs.
Part No.
Description
MOR71992
Blue Boot Sleeves
MOR71993
Red Boot Sleeves
MOR71994
Black Boot Sleeves
Universal Spark Plug Wire Loom Kits
Looms support the spark plug
wires and keep them from
crossfiring or coming in
contact with the headers.
Chrome-plated steel support bracket
fastens to the valve cover stud or bolt.
Can be used with 7, 8, or 9mm wires, with or with-
out sleeves, on 4-, 6-, or 8-cylinder engines. Kit includes four 2-hole looms, two 3-hole loom, and four brackets.
Part No.
Timing Pointers
Description
MOR71900
Indexing Washers, Taper Seat .010", .021", .032"
MOR71910
Indexing Washers, Flat Seat .040", .050", .064"
MOR72151
MOR72160
Description Blue Black Red Yellow
Black anodized billet aluminum pointers fit closely to the damper, allowing precise timing adjust- ments. Pointers offer up to 4° of adjustment. Sold complete with stainless mounting hardware.
SB Chevrolet, 6-1/4" Dia. Damper
BB Chevrolet, 6-1/4" Dia. Damper
Part No. Description
Spark Plug Wire Separator Kits
Part No.
Description
Part No.
Description
MOR60100
MOR72150
Blue Wire Loom Kit, 7-9mm
MOR72151
Red Wire Loom Kit, 7-9mm
MOR72153
Black Wire Loom Kit, 7-9mm
Separators accommodate
7, 8, or 9mm wires, with
or without sleeves. Plastic
separators prevent crossfir-
ing and can be used over valve covers or under headers. Easily snap into place to hold wires securely. Packaged six to a card (two each of 2-, 3-, and 4-hole separators).
Universal Momentary Switch and Cable
MOR60105
MOR60110
SB Chevrolet, 6-3/8" Dia. Damper
SB Chevrolet, 6-3/4" Dia. Damper
MOR60130
MOR60135
BB Chevrolet, 7" Dia. Damper
MOR60140
BB Chevrolet, 7-1/4" Dia. Damper
BB Chevrolet, 8" Dia. Damper
MOR60115
MOR60125
SB Chevrolet, 7" Dia. Damper
SB Chevrolet, 8" Dia. Damper
MOR60145
Usually mounted on the steering wheel to oper-
ate trans-brakes, line locks, or nitrous systems. High- quality momentary switch mounts in a 1/4" dia. hole and includes a 4' long spiral cable.
Part No. Description
7-9mm Wire Separators
MOR72160
MOR72163
MOR72161
MOR72161
11mm or Sleeved Wire Separators
MOR73160
MOR73163
—
—
MOR74122
Universal Momentary Switch and Cable
MOR74115
Spiral Cable Only
519
2022-23