Page 641 - 2022-23 Auto Performance Drag Racing

Turbo 400 Tailhousing RERSH400HB
DRAG RACING
Bellhousings
RERBH001
Significantly stronger than the stock
TH-400 tailhousing, unit is manufac-
tured from aircraft-grade aluminum,
and includes thicker walls and added
gusseting. Improved oil passage
enhances lubrication to the yoke and
bushing/bearing. Fits all GM TH-400,
Reid Racing Super Hydra 400, and ATI
T-400 SuperCase. Offered in standard or special Powerglide length with bushing or bearing.
Part No. Description
* Shorter tailhousing makes a TH-400 the same length as a Powerglide, allowing the same driveshaft to be retained. The TH-400 uses a larger, 32-spline yoke than the Powerglide, which requires a 27-spline yoke. † Tailhousings with bearing require special hardened yoke.
Exhaust Gaskets
Engineered exclusively for use with
Reid Racing two-piece Powerglide or
Super Hydra 400 transmission cases,
bellhousings are manufactured from
high-strength, heat-treated alumi-
num. Bellhousings meet stringent
SFI 30.1 specifications, eliminating
the need for a flexplate shield. The
reduced diameter provides added
floorboard clearance, while the open bottom allows easier converter access. No special flexplate is required.
Part No. Description
* Fits Chevrolet only; Buick/Olds/Pontiac bellhousing (RERBH030) available by special order. † Fits Reid Racing Super 80 (GM 4L80E) transmission case (RERS80) only, available by special order.
RERSH400HB
Turbo 400 Tailhousing, with Bushing
RERSH400HR†
Turbo 400 Tailhousing, with Bearing
RERSH400HRS*
Turbo 400 Tailhousing, Powerglide Length with Bushing
RERBH001*
Chevrolet
RERBH010
SB Ford 289-351W
RERBH020
BB Ford 429-460
RERBH040
BB Chrysler “B”/“RB” 383-440
RERBH060
SB Chrysler “A” 273-360
RERBH801†
Chevrolet, for Reid Racing Super 80 Only
Flexible graphite material gaskets deliver up to 50% crush and withstand over 2,000°F, eliminating burn-out and the need to re-torque. Gaskets offer superior sealing, even on exhaust header flanges that are warped or distorted. Weld Bead gaskets are offered for use with headers that use a weld bead to seal the flange. Sold per pair.
Part No. Description Part No. Description
American Motors
REM1001
304-401, 1970-79, Header/Manifold Applications
REM1002
290-390, 1966-69, Header/Manifold Applications
REM1003
304-401, 1970-79, Modified "Dog Leg" Port, Weld Bead Header Applications
Buick
REM13-001
400-455, 1967-76, Square Port, Header/Manifold Applications
REM13-006
364-425, 1957-66, "Nail Head", Header/Manifold Applications
Small Block Chevrolet (Including Gen. III LS)
REM2004
262-400, 1-9/16" Dia. Round Port, Header Only
REM2005
262-400, 1-17/32" x 1-19/32" Square Port, Header Applications Only
REM2006
262-400, 1-3/8" x 1-1/2" Stock Port, Header/Manifold Applications
REM2007
262-400, Brodix Track 1, 1-1/2" 1-5/8" D-Port, Header Applications Only
REM2008
4.8-6.0L Gen. III LS, LS1/LS6, 1-7/8" Round Port, Weld Bead Header
REM2011
305-350 Vortec L31, 1-3/8" x 1-1/2" Square Port, Header Applications Only
REM2014
262-400, Brodix Spread Port, Stahl 7-Bolt Pattern, Header Applications
REM2016
262-400, 1-5/16" x 1-3/8" Square Port, Weld Bead Header Applications
REM2017
262-400, Oval Port, 1-9/16" W. x 1-7/8" H., Header Applications
REM2021
262-400, Oval Port, 1-1/2" W. x 1-3/4" H., Header Applications
REM2022
262-350, LT1/LT4/ZZ4 Crate, 1-7/16" x 1-3/8" D-Shaped, Header Only
REM2031
262-400, 1-7/16" Round Port, Weld Bead Header Applications
REM2032
262-400, 1-1/4" x 1-5/8" Oval Port, Weld Bead Header Applications
REM2040
262-400, Stahl/Hooker Adapter Flange Gasket, 7-Bolt Pattern
REM2042
350, '92-96 LT-1, '96 LT-4, Header Applications
REM2043
262-400, 18° Cyl. Head, Stahl 7-Bolt Pattern, Header Applications
REM2044
262-400, 18° Cyl. Head, 1-5/8" W. x 1-3/4" H., Square Port, Header Applications
REM2048
4.8/5.3/5.7/6.0/6.2L LS, 1-1/2" Dia., "Weld Bead" Header Applications
REM2049
4.8-6.0L Gen. III LS, LS1/LS6, 1-3/4" Round Port
REM2066
6.2L LS9/7.0L LS7, 2006-13 Corvette, D-Port, 2" W. x 1-3/4" H., Header Applications
REM2081
262-400, AFR 23° Cyl. Head, Non-Spread Port, 1.465" H. x 1.570" W., Header Applications
Big Block Chevrolet
REM2002
396-502, 1-7/8" Round Port, Header Applications Only
REM2003
396-502, 1-13/16" x 1-7/8" Square Ports, Header/Manifold Applications
REM2013
396-502, Lg. Race Port, 2-5/32" Round Port, Headers Applications Only
REM2029
ZZ 502 1st Gen., 1-3/4" H. x 1-7/8" W., Rectangular Port , Header Application NEW!
REM2030
454-502, Mark IV/V/VI, 2" x 1-7/8" Irregular Stock Port, Header/Manifold
REM2035
396-502, D-Port, AFR Magnum, Header Applications
REM2036
396-454, 1-3/4" Round Port, Weld Bead Header Applications
REM2047
396-502, Large Round Race Port, 2.40" Dia., Header Applications
REM2058
454-496, 1996-09 Vortec, 1-7/8” x 1-15/16” Sq. Port, Header/Man. Applications
REM2068
396-454, 2” Round Port, Header Applications
Chrysler Late Hemi
REM6022
5.7/6.1/6.4 Hemi, 2005-14, D-Shaped Port, 1-15/16" x 1-3/8", Header Applications
Small Block Chrysler
REM6003
318-360, 1968-92, 1-1/16" x 1-25/32" Square End Ports, Weld Bead Header
REM6004
318-360, 1992-02 Magnum, 1-7/32" x 1-25/32" Sq. End Ports, Header/Man.
REM6009
318-360, 1968-92, 1-3/16" x 1-27/32" Square End Ports, Header/Manifold
REM6027
318-360, 1968-92, Edelbrock Performer RPM, 1-1/4" x 1-3/4" End Ports, Header Applications
Big Block Chrysler
REM6002
361-440, 1957-80, 1-7/8" x 1-3/8" Square Port, Header/ Manifold
REM6019
440, Indy Cyl. Head, Square Port, 1-7/8" x 1-5/8", Header Applications
REM6023
426 Hemi, 1964-71, 1-27/32" x 1-3/4" Square Port, Header/ Manifold Applications
639
2022-23