Page 682 - 2022-23 Auto Performance Drag Racing

Affordable Series Aluminum Oil Pan Kits
DRAG RACING
Kits are engi-
neered to ef-
fectively control
oil for increased
horsepower.
Seven-quart
(plus oil filter)
pans feature
PTFE-coated,
uni-directional
windage
screens and trap door baffling systems. Matching oil pump and pick-up assemblies are included.
Oil Pre-heaters
Pre-heating oil increases performance and durability. Confined element or self- adhesive pad oil pre-heaters may be plugged into a 110/120-volt source. Use on engine and transmission oil pans, dry sump tanks, and rear end housings.
Part No.
Fabricated Aluminum Transmission Pans
Fabricated .090" thick alu- minum pans offer increased capacity
and are significantly lighter than steel or
cast aluminum pans. A
3/16" thick pan rail provides a
superior sealing surface and each
pan includes a magnetic drain plug,
filter extension (where applicable), and fasteners.
STF6770
STF1020
Description
STF6770
Confined Element, 4" Long, for Use In Aluminum Oil Pans/Tanks
STF6771
Confined Element, 4" Long, for Use In Steel Oil Pans/Tanks
Part No.
Description
STF1020*
SB Chevy, Pre-1986 2-Pc. Rear Main Seal, Std. Vol. Pump
STF1020AB*
SB Chevy, Pre-1986 2-Pc. Rear Main Seal, Hi-Vol. Pump, Stroker Notches
STF1065
Olds “Rocket” Small Block
* May not fit certain chassis such as 1962-67 Chevy II, early Chevelle, early Camaro, or V8 Monza. Check dimensions before purchasing.
High-Performance Aluminum Water Pumps
STF6770
Part No.
Description
STF4003
Turbo 350 Transmission Pan
STF4005
Powerglide Transmission Pan
Stewart Components belt-driven water pumps are available in three versions. The Stage 2 pump’s ribbed, heat-treated aluminum housing is fitted with rigid, 3/8" cam stop, 3/4" diameter shaft (unless noted), maximum-flow, nodular iron impeller and water/anti-freeze compatible seal. Stage 3 pumps add 1/2" billet steel fan hub and 5/8" or 3/4" diameter shafts to perform at high RPM. Stage 4 pumps combine all
of Stage 2 and Stage 3 pump's outstanding features in addition to a maximum-flow DRV 8-vane CNC-machined 6061-T6 aluminum impeller, (1) -8AN & (2) -4AN auxiliary inlets, and (2) -12AN auxiliary outlets.
Description Stage 2 Part No. Stage 3 Part No. Stage 4 Part No.
Inline Electric Water Pumps
Inline electric water pumps utilize high-efficiency, computer-controlled brushless motors for superior reliability. Pumps feature an inline, flow-through design, are compatible with 12- or 16-volt electrical systems, and draw very little amperage. Choose from billet aluminum or lightweight polymer housed models.
STE23103
SB Chevy, Pre ‘69 Short, 5/8" Shaft
STE22103
—
—
SB Chevy, Pre ‘69 Short, 3/4" Shaft
STE22203
STE32203
—
SB Chevy, 71-74 Corvette Short, 3/4" Shaft
—
—
STE43143
SB Chevy, 71-82 Corvette Short, 3/4" Shaft
STE23103
STE33103
BB Chevy, 65-70 Short, 5/8" Shaft
—
STE21104
—
BB Chevy, 65-70 Long, 5/8" Shaft
—
STE21113
—
SB Ford 70-78, 221-351W
—
—
STE36113
Part No.
Description
STEE389A-BK14
Polymer Electric Water Pump, 1-1/4" Inlet/Outlet, 7" Long x 4-1/2" Wide, 4 Lbs.
STEE558A-BK
Billet Aluminum Electric Water Pump, 1-3/4" Inlet/Outlet, 6-3/8" Long x 4-1/4" Wide, 5 Lbs.
STEE558A-BK
680
2022-23