Page 83 - 2022-23 Auto Performance Drag Racing
P. 83

                                 Spools
Ford 9" Housing Studs
ALL72040
Studs secure the center section to the housing and are installed by pulling through with a nut for a press fit. 3/8"-24 threads. Package of 10.
ALL68060
Ford 9" Gaskets
DRAG RACING
 Rear Ends & Axles
  Replace a troublesome positive traction
unit with a high-quality Allstar spool. Substantially lighter than conventional car- riers, spools deliver equal power to both rear wheels. Ultra-lite steel spools have more light- ening holes and a narrower ring gear flange than standard units.
 Ford 9" Steel Spools
Part No.
Aluminum Spools
Part No.
Mini Spools
Description
Description
Gaskets are precision die-cut to ensure a leak free seal.
Part No. Description
Ford 9" Pinion Support ALL68396
ALL72044
  ALL68060
  28-Spline, Scalloped, 7.5 Lbs.
  ALL68062
28-Spline, Ultra-Lite, 6.3 Lbs.
ALL68063
 28-Spline, Ultra-Lite Scalloped, 6.0 Lbs.
 ALL68064
  31-Spline, Scalloped, 7.6 Lbs.
  ALL68066
31-Spline, Ultra-Lite, 6.1 Lbs.
ALL68067
  31-Spline, Ultra-Lite Scalloped, 5.8 Lbs.
  ALL68070
35-Spline, for 3.250" Case, 7.6 Lbs.
ALL68072
 35-Spline, for 2.893" Or 3.062" Case, 7.9 Lbs.
 ALL68074
  40-Spline, for 3.250" Case, 6.7 Lbs.
      ALL72044
  Paper
  ALL72045
 Composite with Steel Core
   “Daytona” forged aluminum pinion support replaces original equipment cast iron support. Support is furnished with races installed and is for use with 28-spline pinion gears.
Pinion Seals
Replace leaking or damaged seals in most popular differentials.
  ALL68114
  Quick Change Winters, 31-Spline, 2.030" Bearings
  ALL68115
 Quick Change D.M.I., Frankland, Tiger and Richmond, 31-Spline, 2" Bearings
    Part No.
Pinion Yokes
Description
 ALL72145
 Quick Change 5/16" Wide
 ALL72144
  Quick Change 1/2" Wide
  ALL72143
Quick Change 3/4" Wide
ALL72146
  Ford 9" Standard, 28-Spline, 3" O.D.
  ALL72147
7.5" GM
ALL72148
  8.5" GM
    Mini spool assemblies replace
the OE side and spider gears in open-style carriers to provide
equal traction to both axles. Mini
spools are precisely machined for
proper fit and heat treated for durability.
• 1957-87 Ford 9" Rear Ends with 3/4" Cross Pin
• 1981-94 Ford 8.8" Rear Ends with 28-Spline Axles
• 1976-88 GM 7.5" with 7.5" Or 7.625" Ring Gear, 26-Spline Axles • 1964-72 GM 10-Bolt with 8.2" Dia. Ring Gear, 28-Spline Axles
• 1970-76 GM 10-Bolt with 8.5" Dia. Ring Gear, 28-Spline Axles
• 1965-76 GM 12-Bolt with 8.875" Dia. Ring Gear, 30-Spline Axles
Part No. Description
ALL68164
ALL68122
     Part No.
Ford 9" Yokes
‡ New
Pinion Nuts
Spline
U-Joint
Width
Material
ALL72155
ALL68380
ALL68382
Cap Dia.
ALL68384
Length
      ALL68384
  28
1310
3-1/4"
1.062"
  Aluminum
  Standard
  ALL68375‡
28
1310
3-1/4"
1.062"
Cast Steel
Standard
ALL68376‡
  28
1330
3-5/8"
1.062"
  Cast Steel
  Standard
  ALL68377‡
28
1330
3-5/8"
1.062"
Cast Steel
1" Longer
ALL68380
 28
1350
3-5/8"
1.187"
 Forged Steel
 Standard
 ALL68382
  35
1350
3-5/8"
1.187"
  Forged Steel
  Standard
    ALL68121
 Ford 9", (Lightweight) 28-Spline
 ALL68122
  Ford 9", (Lightweight) 31-Spline
  ALL68168
Ford 8.8", 28-Spline
ALL68166‡
  GM (7.5" Ring Gear), 26-Spline
  ALL68162
GM 10-Bolt (8.2" Ring Gear), 28-Spline
ALL68160
  GM 10-Bolt (8.5" Ring Gear), 28-Spline
  ALL68164
 GM 12-Bolt (8.875" Ring Gear), 30-Spline
   ‡There are at least three different 7.5" GM cases available, shimming may be required between the case and side gear of the spool to eliminate space between blocks
  Cross Pins Part No.
GM Axle C-Clips
Description
ALL68120
Replace original worn or damaged nuts each time a gear set is changed. Nut secures driveshaft yoke to pinion gear.
Part No. Description
Pinion Yoke Wrench ALL68372
Wrench fastens to most popular pinion flanges and companion flanges to hold when setting bearing pre-load and tightening retaining bolt or nut.
  ALL68120
  Ford 8.8" and 9" (3/4")
  ALL68167
GM 10-Bolt (7.5" Ring Gear)
ALL68163
  GM 10-Bolt (8.2" Ring Gear)
  ALL68161
GM 10-Bolt (8.5" Ring Gear)
ALL68165
  GM 12-Bolt (8.875" Ring Gear)
      ALL72155
 Ford 8.8" and Standard 9"
 ALL72156
  GM 7.5 and 8.5
   Replacement C-clips for popular GM 10- and 12-bolt axles.
Part No. Description
   ALL66120
 7.5" 10-Bolt, 2-Pack
 ALL66121
  8.5" 10-Bolt and 8.875" 12-Bolt, 2-Pack
  ALL66120
81
2022-23
   81   82   83   84   85