Page 82 - 2022-23 Auto Performance Drag Racing

Ring and Pinion Installation Kits
DRAG RACING
Allstar ring and pinion installation kits are available with or without bearings. Kits contain all the hard-to-find individual parts for a quick, trouble-free installation.
Bearing Kits Include:*
• Pinion and Side (Carrier) Bearings • Pinion Seal
• Pinion Depth Shims
• Adjustable Side (Carrier) Shims
• Crush Sleeve or Solid Spacer
• Pinion Nut
• One Ounce Tube of Silicone or Gasket • Gear Marking Compound
• Ring Gear Bolts
Shim Kits Include:*
• Pinion Seal
• Pinion Depth Shims
• Adjustable Side (Carrier) Shims,
Two (If Applicable)
• Crush Sleeve or Solid Spacer
• Pinion Nut
• One Ounce Tube of Silicone or Gasket • Gear Marking Compound
• Ring Gear Bolts
Rear Ends & Axles
*Kit components shown for reference only, specific components will vary depending on application.
Bearing Kit Shim Kit Carrier Type
Application
General Motors
ALL68515
ALL68615
10-Bolt
7.5", Passenger and Light Truck S-10 1982-1998
—
ALL68616
10-Bolt
7.5", Passenger, Except Monza 1977-1981
—
ALL68622
10-Bolt
8.2", Chevy Passenger and G-10 Van, 30-Spline Pinion
ALL68521
ALL68621
10-Bolt
8.5", 30-Spline Pinion Passenger and Light Truck
ALL68518
ALL68618
12-Bolt
8.875", Chevy and GMC Truck and Blazer, 1.438" Pinion
ALL68519
ALL68619
12-Bolt
8.875", Chevy Hi-Performance Passenger Axle, 1.625" Pinion
Chrysler
ALL68532
ALL68631
8-3/4"
489 Casting with 2.000" I.D. Carrier Bearings (Large #9 on Side of Casting)
ALL68531
ALL68631
8-3/4"
489 Casting with 1.796" I.D. Carrier Bearings (Large #9 on Side of Casting)
ALL68537
ALL68637
8-3/4"
742 Casting with 1.796" I.D. Carrier Bearings (Large #2 on Side of Casting)
Ford Motor Company
—
ALL68639
8"
“Pig” Type, 25-Spline Pinion
ALL68513
ALL68613
8.8"
Salisbury Type with 10-Bolt Cover, 30-Spline Pinion
ALL68510
ALL68610
9"
2.893" Carrier Bearing, Stock 28-Spline Pinion Support, Solid Spacer
ALL68511
ALL68611
9"
2.893" Carrier Bearing, Stock 28-Spline Pinion Support, Crush Sleeve
ALL68509
ALL68610
9"
3.062" Carrier Bearing, Stock 28-Spline Pinion Support, Solid Spacer
ALL68512
ALL68611
9"
3.062" Carrier Bearing, Stock 28-Spline Pinion Support, Crush Sleeve
ALL68539
ALL68610
9"
3.062" Carrier Bearing, Daytona 28-Spline Pinion Support, Solid Spacer
ALL68538
ALL68611
9"
3.062" Carrier Bearing, Daytona 28-Spline Pinion Support, Crush Sleeve
ALL68543
ALL68610
9"
3.250" Carrier Bearing, Daytona 28-Spline Pinion Support, Solid Spacer
ALL68542
ALL68611
9"
3.250" Carrier Bearing, Daytona 28-Spline Pinion Support, Crush Sleeve
ALL68540
—
9"
3.250" Carrier Bearing, MW or Strange 28-Spline Pinion Support, No Spacer or Crush Sleeve
ALL68541
—
9"
3.250" Carrier Bearing, MW or Strange 35-Spline Pinion Support, No Spacer or Crush Sleeve
Dana
ALL68533
ALL68633
—
Model 44/1967-1997
ALL68534
ALL68634
—
Model 60 and 61/1966-1998
Ring and Pinion Gear Sets
Quality differential components are suitable for race, street and off-road use. Lapped in matched sets for quiet operation.
GM 7.5"
Sets fit 10-bolt with 7.5" ring gear, 1.438" diameter pinion stem, and 27-spline pinion.
*Set includes standard width ring gear for use with 3.23 and numerically higher ratio carriers or when using 3.08 and numerically lower ratio carriers and ALL70100 spacer.
†Set includes thick ring gear for use with 3.08 and numerically lower ratio carriers.
GM 8.5"
Sets fit 10-bolt with 8.5" ring gear, 1.625" diameter pinion
Ford 9"
Sets fit 10-bolt with 9" ring gear, 1.313" diameter pinion stem
and 28-spline pinion.
Part No.
Ratio
Tooth
Part No.
Ratio
Tooth
ALL70010
3.50
35-10
ALL70028
5.14
36-7
ALL70012
3.70
37-10
ALL70030
5.29
37-7
ALL70014
3.89
35-9
ALL70032
5.43
38-7
ALL70016
4.11
37-9
ALL70034
5.67
34-6
ALL70018
4.30
39-9
ALL70036
5.83
35-6
ALL70020
4.56
41-9
ALL70038
6.00
30-5
ALL70022
4.71
33-7
ALL70040
6.20
31-5
ALL70024
4.86
34-7
ALL70042
6.33
38-6
ALL70026
5.00
30-6
ALL70044
6.50
39-6
Part No.
Ratio
Tooth
Part No.
Ratio
Tooth
ALL70110*
3.23
42-13
ALL70115†
3.73
41-11
ALL70112*
3.42
41-12
ALL70116*
4.10
41-10
ALL70113†
3.42
41-12
ALL70117†
4.10
41-10
ALL70114*
3.73
41-11
ALL70118*
4.56
41-9
GM 7.5" Ring Gear Spacer ALL70100
stem, and 30-spline pinion.
Spacer allows installation of 3.23 and nu- merically higher ratio gear sets with standard thickness ring gears into 3.08 and numerically lower carriers. Steel spacer is .3125" thick and includes ten 7/16"-20 x 1-1/4" UHL LH bolts.
Gear Marking Compound Kit ALL78250
Part No.
Ratio
Tooth
Part No.
Ratio
Tooth
Gear marking compound kit is a good
way to identify correct gear contact area when
installing or adjusting ring and pinion gear sets.
Kit includes gear marking compound and application brush.
ALL70120
3.08
40-13
ALL70126
4.10
41-10
ALL70122
3.42
41-12
ALL70128
4.56
41-9
ALL70124
3.73
41-11
80
2022-23