Page 97 - 2022-23 Auto Performance Drag Racing

GM Metric Chassis Trailing Arm Bracket Kits
Lower Spring Cups
Steel spring cup has a 7" wide curved base that welds to the top of a 3" diameter rear end axle tube creating a flat mounting surface for 5" O.D. racing springs Com-
monly used to replace OE style “pigtail” lower spring mount. Sold each.
DRAG RACING
Suspension
Includes rear upper and lower control arm mounts. Upper mount must be cut to desired height depending upon where housing is located in the chassis.
ALL56124
ALL56123
NEW Lightweight Version!
Part No.
Description
ALL56124
Standard Cup
ALL56123
Lightweight Cup NEW!
ALL99282
ALL99283
ALL99284 Part No.
ALL60052 ALL99282
ALL60053 ALL99283
ALL60054 ALL99284
ALL60052
ALL60053
ALL60054
Leaf Spring Pad ALL56126
Steel pad welds to 3" diameter rear end
axle tube when mounting rear end to most
leaf springs. Pad is 2-1/2" W by 5-3/4" L and has a 5/8" center pilot hole. Sold each.
Clamp-On Lower Spring Pad
ALL56127
Steel clamp-on leaf spring pad fits 3" diam- eter axle tubes. Pad measurements are the same as ALL56126. Sold each.
Aluminum Lowering Blocks
Description
Easily adjust ride height on leaf spring cars. Standard and adjustable styles are available in extruded or billet aluminum. Blocks are 2-1/2" W x 5" L. Sold each.
ALL60052
Kit with Single Hole Lower In Stock Location
ALL99282
Brackets Only, 1 Pair
ALL60053
Kit with Single Hole Lower, Lowered to Increase Traction
ALL99283
Brackets Only, 1-Pair
ALL60054
Kit with Multi-Hole Lower
ALL99284
Brackets Only, 1-Pair
Brackets have three 1/2"
mounting holes spaced 1-1/4"
apart and may be welded to
3" axle tubes to provide three
trailing arm mount locations.
ALL60058 is made of 3/16"
steel and welds to the top of the rear end housing, providing an attachment point for upper trailing arms.
ALL56136
Part No.
Height
Pin Dia.
ALL56131
ALL56065
Extruded Aluminum
ALL56130
1"
9/16"
ALL56131
1-1/2"
9/16"
ALL56132
2"
9/16"
ALL56133
2-1/2"
9/16"
ALL56134
3"
9/16"
Billet Aluminum
ALL56060
3/4"
5/8"
ALL56061
1"
5/8"
ALL56062
1-1/2"
5/8"
ALL56063
2"
5/8"
ALL56064
2-1/2"
5/8"
ALL56065
3"
5/8"
ALL56136*
1-1/2" Adj.
5/8"
ALL56138*
2-1/2" Adj.
5/8"
Universal Trailing Arm Brackets
ALL60050 Part No. Description
Metric Upper Trailing Arm Mounts ALL60059
Mounts weld to the top of Ford 9" housing creating a mounting point for GM Metric chassis upper trailing arms. Bushings not included.
ALL60051
ALL60058
*Pins on blocks can be adjusted 1-1/4" to the front or rear of center position.
Leaf Spring U-Bolt ALL68344
Leaf spring u-bolt fits 3" axle
tubes, has a 1/2" diameter and is 10" long. Heat treated steel bolt is sold each.
ALL60050
Lower Bracket
ALL60051
Shock Bracket For Lower
ALL60058
Upper Bracket
NEW!
95
2022-23