Page 98 - 2022-23 Auto Performance Drag Racing

DRAG RACING
Suspension
U-Bolt Pads
Leaf Spring Slider Box
ALL60035
Replace rear leaf spring shackles with Allstar’s leaf spring slider box. Bolt-in slider box with roller bearing design eliminates leaf spring binding, freeing up car. Fits 2-1/2" wide Chrysler type leaf springs.
Leaf Spring Shackles
6-hole brackets for mounting leaf springs are 9" L x 2" W and have 1/2" diameter holes spaced 1" on center. Package of 2.
Universal style
u-bolt pads fit
3" diameter
axle tubes and
leaf springs up to 2-1/2" wide using 1/2" u-bolt fasteners. Center alignment hole is 5/8" to accept most lowering blocks or spring bolts. 1/4" thick formed steel pads have a gusseted shock mount with a welded bung to accept 1/2" mounting hardware.
ALL60037
Description
ALL60036
ALL60038
Part No.
ALL60036
RH Pad
ALL60037
LH Pad
ALL60038
Dual Mount Pad
Leaf Spring Slider Box ALL60034
Part No.
Description
Leaf spring slider box replaces conven-
tional leaf spring shackles to enable
effortless suspension movement and
prevent binding. Box may be welded or
bolted directly to chassis, and includes two nylon bushings with spring mounting hardware. Fits 2-1/2" wide Chrysler type leaf springs.
Part No. Description
Replacement Parts
ALL99055 Bushings, 2-Pack Tools & Pit Equipment
Hole Saw Set ALL10412
Use with tubing notchers. Does not include an arbor for a hand drill. Set includes one of each size: 3/4", 1", 1-1/8", 1-1/4", 1-1/2" 1-5/8" and 1-3/4".
ALL60055
ALL60056
ALL60055
Steel 1/4" Thick
ALL60056
Aluminum 3/8" Thick
Part No.
Individual Hole Saws
Description
Ensure that chassis tubing is level and plumb when building roll cages or checking driveshaft angles. Pow- ered by a standard 9 volt battery.
Level Base ALL10741
Level base simplifies notching
and bending of round tubing
and helps ensure accuracy. Base fastens to standard ballast or weight brackets and clamps to the tube as a reference point when creating parallel, perpendicu- lar, any angle of opposing notches or bends during fabrication. Base accepts most digital levels including ALL10113, ALL10742 and ALL10744 or standard bubble levels.
Individual Mounting Brackets
Smart Tool ALL10113
ALL10413
3/4"
ALL10414
1"
ALL10415
1-1/8"
ALL10416
1-1/4"
ALL10417
1-1/2"
ALL10418
1-5/8"
ALL10419
1-3/4"
Note: Hole saws up to 1-1/8" diameter use 1/2"-20 thread, larger hole saws use 5/8"-18 thread.
Digital Levels
Digital level with magnetic base
measures the angle of a single
straight surface or the angle of a
joint between two straight surfaces. Displayed value on the LCD screen rotates to right side up when digital level is in an upside down position. Powered by three 3V CR2032 batter- ies (included).
Part No. Description
Part No.
Description
ALL14192
1"
ALL14193
1-1/4"
ALL14194
1-3/8"
ALL14195
1-1/2"
ALL14196
1-5/8"
ALL14197
1-3/4"
ALL14195
ALL10742
Compact Digital Level, 2" x 2" x 1"
ALL10744
Digital Level, 6" x 2.25" x 1.25"
96
Digital scale and mounting bracket sold separately.
2022-23