Page 28 - 2022-23 Auto Performance Open Wheel Catalog

Inline Oil Temperature Tees
Install in the oil return line (pump-to-tank) to adapt a probe for an oil temperature gauge. All inline tees have 1/2" NPT threads for probe fittings and 1/4" holes for mounting.
SB Chevy Oil Restrictors
Oil restrictors reduce the amount of oil flow to the
top of the engine, reducing the risk of evacuating
the oil pan in continuous high-RPM engines while
allowing more oil to be directed to the main and rod bearings. Restric- tors have a .055" I.D. hole and include two extra O-ring seals. Package of 2.
Part No. Description
Note: Not recommended for hydraulic lifter engines.
Dart/Chevy SHP Oil Restrictors
Oil restrictors for use in Dart SB Chevy SHP blocks are specifically designed for the priority main
oil system to reduce the amount of oil flow
to the top of the engine, reducing the risk
of evacuating the oil pan in continuous high-RPM
engines. Kit includes two restrictors, an extra O-ring, and detailed installation instructions.
Part No. Description
* Smaller port size may be modified as needed for preferred amount of oiling.
SB Chevy Lifter Valley Vents
ALL90065
Lifter valley vents positively vent the
crankcase and eliminate oil drain-through
and windage losses. When used with
valley screens, vents prevent damage
from broken valvetrain components. Vents have 1/4" NPT threads and a 9/16" hex head to ease installation. Package of 8.
Mini Breather Tanks
Small-capacity spun aluminum tank will vent dry sump tank, transmission or rear end. Tank has a 1/4" NPT bung on bottom and a clamp-style bracket for mounting to chassis tubing.
Part No.
Reducer Fittings
Description
ENGINE
ALL90040
-10AN
ALL90041
-12AN
ALL90042
-16AN
ALL90070
SB/BB Chevy, Aluminum with Hex Head
ALL90071
SB Chevy Bowtie Block, Steel with Allen Head
Reducer fittings are an economical way to reduce the male AN thread size on items such as oil coolers and inline temperature tees.
Part No.
Sprint Car Dry Sump Tank
Mounting Brackets
Description
ALL90075
-10AN to -8AN
ALL90076
-12AN to -10AN
ALL90072
Restrictor Kit with .090" I.D. Hole
ALL90073 *
Restrictor Kit with .030" I.D. Hole
Mounting brackets are designed
to mount 6" diameter tanks to the left
front corner of standard small block Chevy
engines. Commonly mounted with front motor
mount brackets, the upper bracket utilizes the water
pump mounting holes and the lower bracket fastens to the early front engine mount mounting holes.
Part No.
Immersion Heaters
Immersion-style heater preheats oil in wet sump oil pan or dry sump tanks
to reduce overall warm up time and improve lubrication during initial start up. 5/8" diameter stainless steel
sleeve inserts into pan or tank and secures with a welded on 1/2"NPT brass screw-in fitting. 120-volt operation.
Part No.
Heating Pads
Description
ALL36092
Upper Tank Mount
ALL36093
Lower Tank Mount
Part No.
Description
ALL36140
ALL36140
Clamps to 1-1/2" Dia. Tubing
ALL36103
Replacement Breather Element
Description
ALL76415
4-3/4" Long Heater Element with 3' Long Cord, 400W
ALL76416
7-1/2" Long Heater Element with 12" Long Cord, 250W
High-temperature
silicone heating pads
externally preheat oil in
wet sump oil pans, dry
sump tanks, and auto-
matic transmission pans reducing overall warm-up time and improving lubrication during initial start up. 3" cord, 120-volt operation.
Part No. Description
ALL76420
2"x15", Self-Adhesive Pad, 200 W
ALL76422
5"x7", Self-Adhesive Pad, 375 W
ALL76424
6"x12", Velcro Strapped Pad for 6" O.D. Tanks, 435W
26
2022-23 PARTS AND ACCESSORIES
Matt Campbell
Paul Arch