Page 386 - 2022-23 Auto Performance Open Wheel Catalog

Sprint Car Fuel Cells
These complete tank assemblies include ultra-durable calendared
rubber bladder, cross link polyethylene roto-molded shell, low-profile vent check valve, and 4"x6" fill plate with flush cap.
Sprint Car Direct Engine Mount Radiator Kit
PLASRS15CFDM-SP-KIT
This kit allows the radiator to
stay attached to the motor all
the time, making engine changes quicker and easier during race nights. Kit contains custom-built cross-flow radiator, overflow can, lower mounting brackets, small or big KSE water pump front housing, and all necessary hardware. Radiator measures 20-5/8" wide x 16 " high x 1-3/4" thick. Manufactured with four -10AN female inlets and center outlet.
Sprint and
Mini Sprint Radiators
Sprint double-pass radiator is
designed for maximum efficiency. Brackets on side are used to mount
right into the chassis. Mini-sprint
radiator is 12" tall x 17-3/4" wide with 3/4" NPT inlet and outlet. Includes
top flange and 3/8" pins for mounting
to roll cage. Double-pass design provides exceptional cooling.
Part No. Description
Dry Sump Tanks and Bracket
The tank has a 1-1/4" breather tube with single -16AN re- turn and -12AN pickup exiting the bottom. Engine breathes through the oil tank. Eliminates the need for crossover tubes.
Part No.
Complete
Replacement Shell
PLAOS-228-T
28-Gallon Cell, Complete Assembly with Top Pick-Up
PLAFTOS28
PLAOS228B-T
28-Gallon Cell, Complete Assembly with Baffle and Top Pick-Up
PLAFTOS28
PLAOS228C-T
28-Gallon Cell, Complete Light Weight Assembly with Collector Box and Filter
PLAFTOS28
PLAFTAOS230-TA
30-Gallon Cell, Complete Assembly with Top Pick-Up
PLAFTOS30
PLAFTAOS230B-TA
30-Gallon Cell, Complete Assembly with Baffle and Top Pick-Up
PLAFTOS30
PLAFTAOS230ST-TA
30-Gallon Cell, Complete Assembly with Smart Trap Box with Filter
PLAFTOS30
Replacement Parts
PLASAC-061
Part No.
Description
PLASAC-002
Front Cover Plate, 4" x 6" For Sprint Cells
PLASAC-045-12
-12AN Top Pick-up Fitting
PLASAC-061
Fuel Cell Top Plate and Cap
Mini Sprint Fuel Tanks
PLASRS-15
Sprint Radiator, 21" x 20", 1-1/2" Outlet
PLASRS-15CF
Sprint Cross Flow Radiator, 20-5/8" x 16", 1-1/2" Outlet
PLAMSR
Mini-Sprint Radiator, 12" x 17-3/4", Chassis Mount
Complete
Part No. Description
SB Chevy Aluminum Valve Covers
Part No. Description
Small Block Chevy Aluminum Fabricated
Valve Covers with Spring Oilers
PLAVC3
Stock-height, natural finish,
fabricated valve covers manu-
factured with -3AN fitting welded
to each cover allow oil to be
sprayed directly on the valve train. Sold in pairs.
PLAOT-626LH-IB-16SC
PLAOMS214-BL
Hyper 8 Bottom, Pick Up
PLAVC1
No Crossover
PLAVC2-SINGLE
Single Crossover with Breather
Part No.
Remote Dry Sump Oil Tank
PLAOT624CCLH-12S
Description
PLAOT-626LH-IB-16SC
Dry Sump Oil Tank, 26" Tall
PLAOT-626LH-IB-12P
Dry Sump Oil Tank, 26", -12AN Return
PLAOTMB-1
One Piece Oil Tank Mounting Bracket
PLAVC2-SINGLE
Wheel Wrenches
Aluminum wheel wrenches for sprints, midgets and mini-sprints.
Part No.
PLAWW-S18 PLAWW-MS-2-875
Description
This eight-quart remote mount aluminum oil tank is designed to eliminate the need for cross-over tubes by allowing the engine to breathe through the tank. Manufac- tured with two -12AN male inlets, one -16AN male outlet, and one -12AN male breather port. The 3/4" diameter “candy cane” style breather tube come with a K&N filter. 26" tall x 6" O.D. Natural finish.
Throttle Pedal PLATP Floor mounted throttle pedal for
Sprints and Midgets.
PLAWW-S18
Sprint
PLAWW-M-31
Midget
PLAWW-MS-2-875
Mini Sprint
384
2022-23 PARTS AND ACCESSORIES