Page 394 - 2022-23 Auto Performance Open Wheel Catalog

Rebuilding
The Small Block Chevy: Step-by-Step Videobook
SABSA116
This 160-page softbound book and instructional DVD video cover disassem- bly, inspection, machine shop operations, parts selection, and reassembly of the small block Chevy engine.
Sprint Air Horn Seal
Seal works regardless of vibration or variations in tube diameter. Prevents dirt from entering air box and includes aluminum base. Sold individu- ally; four required for V8’s.
Part No. Description
Camber Adjustment Kit
SICCA860KS
Redesigned original adjustment kit to allow
the racer to change camber at the track in a mat-
ter of minutes. Kit lets the front axle lean to just the perfect angle, placing the front tires flat on the race track.
S-A Design Books
S-A offers a full complement of technical books to help the beginner or seasoned oval track enthusiast. Each softbound book is packed full of informative photos and illustrations.
Part No.
Description
SABSA26
How to Build the Small Block Chevrolet, 160 Pages
SABSA116
Rebuilding the Small-Block Chevy, 160 Pages
SABSA204
SABSA215
Performance Automotive Engine Math, 160 Pages
David Vizard’s How to Port and Flow Test Cylinder Heads, 160 Pages
SABSA251
Modern Engine Blueprinting Techniques: A Practical Guide to Precision Engine Building, 192 Pages
Torque Ball Housing Seals
Available for aluminum “MPD” and steel “DMI” bellhousings, seals fit Chevrolet engines with
3.580" crank flange diameter using motor plates
that are 3/8" thick with a thickness variation of
+/- 1/64" and center holes with 6.0" +/- 1/64"
diameter. Seals may fit other housings as well,
but we recommend careful checking before
installation. Both types are supplied with black
anodized rings around the seal and hard-coat anodized cups.
Part No.
Firewall Grommets
Description
SICSEIT3001
2-1/2"-2-3/4" Stacks
SICSEIT3002
2"-2-1/2" Stacks
SICSEIT3003
2-3/4"-3" Stacks
SICTBS1A07
Torque Ball Seal Assy. for MPD Style Housing
SICTBS2A07
Torque Ball Seal Assy. for DMI Style Housing
SICTBS2C07
Replacement Cup Only for DMI Style Housing
SICTBS2S07
Replacement Seal Only for DMI Style Housing
Grommets may be fastened to firewall with rivets or screws to provide a leakproof passage for hoses or wires. Eliminate sharp edges that can cause electrical shorts or fluid leakage.
Part No.
Replacement Sleeves
Rod End Seals
Rod end seals keep dirt and water out of rod ends, insuring longer life and better perfor- mance. Excellent for use on dirt cars. Sold in 6 packs.
Description
SICCA860S5
Silver .5°
SICCA860S1
Blue 1.0°
SICCA860S15
Red 1.5°
Part No.
Description
SICGS10034
3" Diameter, -4AN Hose
SICGS10036
3" Diameter, -6AN Hose
SICGS10038
3" Diameter, -8AN Hose
SICGS100310
3" Diameter, -10AN Hose
SICGS100312
3" Diameter, -12AN Hose
SICGS100316
3" Diameter, -16AN Hose
SICGS100320
3" Diameter, -20AN Hose
SICGS1003BL
3" Diameter, Blank
SICGS20035BL
1-1/2" Diameter, Blank
SICGS404BL
4" Diameter, Blank
SICGS50238BL
2" Diameter, Blank
SICGS101NHBL
Double Hole Grommet, (2) 3" Diameter, Blank
Part No. Description
Rod End Boots SICRERS36PK
Enclosed boots isolate rod ends from dirt, moisture,
and corrosion. Ideal for high-misalignment applica- tions. In sets of six, rod end boots fit 1/2", 5/8", and 3/4" SAE, male or female rod ends.
Pointed Firewall Grommet SICGS4001WPT Ideal for running throttle linkage, oil pressure lines,
battery cables, etc. Grommet has a 2" diameter and a pointed design with no hole.
Gauge Isolators
SICWS37506PK
3/8" Rod End, 6-Pack
SICWS50016PK
1/2" Rod End, 6-Pack
Use between gauge and dash or gauge panel to dampen vibration.
Part No.
Description
SICDB206225
2-1/16" Gauge Isolator
SICDB260275
2-5/8" Gauge Isolator
392
2022-23 PARTS AND ACCESSORIES