Page 52 - 2022-23 Auto Performance Open Wheel Catalog
P. 52

                  SUSPENSION
   Shock Travel
Indicator Kits
Check compression and rebound travel of coil-over shocks at a glance. Clamp aluminum bracket portion of the kit directly to the coil-over sleeve or shock body and attach the other end to the existing shock eye bolt or under spring cup. May be used with most coil-over and non-coil-over shocks. Clamp is included.
Shock Shims
Uniquely designed shock shims are placed directly onto the shock shaft to simplify fine-tun- ing of the chassis without disassembling the shock or even removing the shock from the chassis. Kits include a variety of shim
designs and sizes for convenient tuning
and set-up.
Starter Standard
Size Kit Kit Kit
STARTER KIT
Deluxe
14mm
 ALL64400
 ALL64402
 ALL64404
16mm
 ALL64440
  ALL64442
  ALL64444
  ALL64404
 Part No.
Description
Includes: U-Shaped Shims 1/16" (4 pcs.), 1/8" (4 pcs.) and 3/8" (2 pcs.); Semi-Solid Shims 1/16" (4 pcs.) and 1/8" (4 pcs.).
STANDARD KIT
Includes: U-Shaped Shims 1/16" (12 pcs.), 1/8" (12 pcs.), and 3/8" (6 pcs.); Semi-Solid Shims 1/16" (12 pcs.) and 1/8" (12 pcs.); 2-Piece Collar Shims 1/2" (2 pcs.), 3/4" (2 pcs.) and 1" (2 pcs.); Storage Case.
DELUXE KIT
Includes: U-Shaped Shims 1/16" (12 pcs.), 1/8" (24 pcs.), and 3/8" (10 pcs.); Semi-Solid Shims 1/16" (12 pcs.) and 1/8" (24 pcs.); 2-Piece Collar Shims 1/2" (6 pcs.), 3/4" (6 pcs.), and 1" (6 pcs.); Storage Case.
 ALL60094
 Kit for Use with 2-1/2" Spring
 ALL60095
  Kit for Use
with 3" Barrel or 5" Springs
  Aluminum Backing Washer ALL64326 Aluminum washer is designed for use with bump stop pucks, as a backer washer, or many other uses.
Washer has a 2-1/4" O.D., 5/8" I.D., and is 3/16" thick.
Shock Shim Components
U-SHAPED SHIMS
Designed for quick removal and installation into tight stacks and locations where twisting the shim into the stack is not an option or when the car is on the ground. Commonly used for fine-tuning the suspension.
SEMI-SOLID SHIMS
Designed for quick removal providing a secure instal- lation that will not fall out yet requires 3/4" of space to install or remove. Typically installed when the vehicle
is off the ground. Commonly used for fine-tuning the suspension.
2-PIECE COLLAR SHIMS
ALL60094
ALL60095
     Bump Stop Shims
Place within the bump stop stack to limit suspension travel. 2" O.D. shims work with most bump stop bushings.
Part No.
Shock Bump Rubbers
ALL64412
 ALL64324
Description
ALL64325
 ALL64324
  1/16" Shim
 ALL64325
 1/8" Shim
   ALL64416 ALL64420
  Conical shaped bump rubbers fit on most shock shafts up to 16mm to limit shock travel. Bump rubbers are 2-3/8" tall and have a 2" O.D. base. A letter desig- nation is molded in the bottom to identify compound.
Part No. Description
Aluminum Flat Spacers
Flat spacers are great for shimming and adding additional clearance to brackets for brake calipers, power steering, alternators, dry sump pumps, or just about anything to help with alignment issues. Package of 2.
Designed to attach around the shaft of the shock and secure in place with a zip tie. Commonly used during initial set-up or to take up a large amount of travel.
Description
2-Pack 10-Pack
25-Pack
 14mm (.550")
 U-Shaped Shim 1/16"
  —
  ALL64410
  ALL64410-25
 U-Shaped Shim 1/8"
—
ALL64412
ALL64412-25
 U-Shaped Shim 3/8"
 —
 ALL64414
 ALL64414-25
 Semi-Solid Shim 1/16"
 —
 ALL64416
 ALL64416-25
 Semi-Solid Shim 1/8"
  —
  ALL64418
  ALL64418-25
 2-Piece Collar Shim Kit 1/2"
ALL64420
ALL64420-10
—
 2-Piece Collar Shim Kit 3/4"
 ALL64422
 ALL64422-10
 —
 2-Piece Collar Shim Kit 1"
  ALL64424
  ALL64424-10
  —
 16mm (.630")
 U-Shaped Shim 1/16"
 —
 ALL64450
 ALL64450-25
 U-Shaped Shim 1/8"
 —
 ALL64452
 ALL64452-25
 U-Shaped Shim 3/8"
  —
  ALL64454
  ALL64454-25
 Semi-Solid Shim 1/16"
—
ALL64456
ALL64456-25
 Semi-Solid Shim 1/8"
 —
 ALL64458
 ALL64458-25
 2-Piece Collar Shim Kit 1/2"
 ALL64460
 ALL64460-10
 —
 2-Piece Collar Shim Kit 3/4"
  ALL64462
  ALL64462-10
  —
 2-Piece Collar Shim Kit 1"
 ALL64464
 ALL64464-10
 —
   ALL64500
 Soft (40 Grams)
 ALL64501
 Medium (50 Grams)
 ALL64502
  Hard (55 Grams)
   Thickness 3/8" I.D. (11/16" O.D.) 1/2" I.D. (1" O.D.)
 1/8"
 ALL18740
 ALL18760
 1/4"
 ALL18742
 ALL18762
 3/8"
  ALL18744
  ALL18764
 1/2"
 ALL18746
 ALL18766
  50
2022-23 PARTS AND ACCESSORIES
   50   51   52   53   54