Page 10 - Jones Racing 2022 Catalog
P. 10
www.JonesRacingProducts.com
Standard End Caps
EC-6111-A (7/16 ID for 1-1/8” Mandrel)
EC-6111-B (1/2 ID for 1-1/8” Mandrel)
EC-6111-C (7/16 ID for 1” Mandrel)
EC-6111-D (1/2 ID for 1” Mandrel)
End cap with built-in nut to
turn over engine. For use with
dual dowel pin assemblies
Dual Dowel Pin assembly retaining caps. EC-6111-WC-N-1/2” (1/2 I.D.)
Use EC-6111-WC-N series end caps to EC-6111-WC-N-7/16” (7/16 I.D.)
incorporate an engine turn over nut into End Cap for Dual Dowel Pin
your stack up, or you can use EC-6111-WC Assemblies
end caps to create a lower profile assembly. EC-6111-WC-1/2” (1/2 I.D.)
EC-6111-WC-7/16” (7/16 I.D.)
CSN-6103-A (1-1/8” mandrel)
CSN-6103-B (1” mandrel)
WR-8101-A (Open End Wrench)
WR-8101-B (Closed End Wrench)
3/16” Woodruff key 1/8” Keyways for CS Pulleys
WK-2109-A (½ Moon Woodruff Key) KS-2109-B (1” Long, 1/8” Keyway)
KS-2109-C (0.83” Long, 1/8” Keyway)
KS-2109-C2 (3/4” Long, 1/8” Keyway)
DP-2109-A KS-2109-D
(2: 3/4” Long, 3/16” Dowel Pins) (1/2” Long, 1/8” Keyway)
RP-2109-C 3/16” Keyways for OP Pulleys
(2: 1” Long, 3/16” Roll Pins) KS-2109-A (1” Long, 3/16” Keyway)
