Page 3 - Installation Manual-Pickup Tuck_English_Color

Level Top
7 8

(1) Swing down Support (1) Adjust Height
Strut (E) and center Top Adjuster Strut (G)
Panel Assembly (A) over as required to
Back Panel/Side Support ensure Top Panel
Assembly (J). Assembly (A) is
(2) Push/engage Support level fore and aft
Strut (E) through slot in relative to the truck
Back Panel/Side Support bed.
Assembly (J).

9 10

10
(S)

(R)
(S)
(R)
(1) Swing Side Panel– Driver (H)
(M) inward to allow access
to Height Adjusters– Top
Panel (H) as shown. Ensure (1) Swing Side Panel– Driver (M) outward to truck bed side
Height Adjuster– Side Panel wall as shown. Adjust Height Adjuster – Side Panel (S)
(S) is in uppermost position ensuring snug fit between truck bed side wall channels
resting on rib of truck bed and bed floor.
floor. (2) Route Retaining Strap (R) securely in slot between
(2) Adjust Height Adjusters– Top truck bed floor and tailgate.
Panel (H) upward until snugly (3) Repeat above steps for Passenger Side.
engaged underneath truck
bed side wall channels.
(3) Repeat above steps for
Passenger Side.

IMPORTANT: Retaining Straps (R)) must be securely attached to the Side Panels (M) and (N) and routed
between the tailgate/truck bed slot to prevent possible drift toward the truck cab.
(R)
See the step-by-step installation video at PickupTuck.com/Installation or
contact the Service Department if you have further questions.

www.pickuptuck.com U.S. Patent No.: 10,625,687