Page 13 - Paletta Catalogue 2

Finishers & Reflector Color Legend Finishers & Reflector Color Legend

WHITE 405A 405F 416E WHITE 405A 405F 416E
SILVER 405B 416A SILVER 405B 416A
BLACK 405C 416B Technical Symbols Protection from object > 1mm in size (eg wire), no pro- BLACK 405C 416B Technical Symbols Protection from object > 1mm in size (eg wire), no pro-
tection from rain, spraying and splashing
tection from rain, spraying and splashing
ALUMINUM 405D 416C ALUMINUM 405D 416C
Compliant to European Norms Significant protection from dust, protection from Compliant to European Norms Significant protection from dust, protection from
STAINLESS STEEL 405E 416D splashing, and nozzle pressure STAINLESS STEEL 405E 416D splashing, and nozzle pressure
Surface Mounted Diode Surface Mounted Diode
COB Chips on Board COB Chips on Board
Restriction of Hazardous Substances Air tight, protection from all rain and sea condition Restriction of Hazardous Substances Air tight, protection from all rain and sea condition
Specification Code Legend Illuminating Engineering Society Specification Code Legend Illuminating Engineering Society
LED Chip Brands in America LED Chip Brands in America
Underwriters Laboratories Underwriters Laboratories
COB IP40 Quality Certification Center COB IP40 Quality Certification Center
Compulsory Certificate Characteristics Table Compulsory Certificate Characteristics Table
FAMILY MODEL POWER CCT. OPTICS CONTROL FINISHING ACCESSORIES FAMILY MODEL POWER CCT. OPTICS CONTROL FINISHING ACCESSORIES
DL DOWNLIGHT 504 15W 27 2700K 15 15° SW SWITCHING B BLACK HC HONEYCOMB LOUVRE • 42W ON REQUEST Circular Hole Dimension (mm) Source Lumen DL DOWNLIGHT 504 15W 27 2700K 15 15° SW SWITCHING B BLACK HC HONEYCOMB LOUVRE • 42W ON REQUEST Circular Hole Dimension (mm) Source Lumen
22W 30 3000K 24 24° PH PHASE S SILVER LS LINEAR SPREAD LENS • REMOTE DRIVER Technical Inspection Association 22W 30 3000K 24 24° PH PHASE S SILVER LS LINEAR SPREAD LENS • REMOTE DRIVER Technical Inspection Association
30W 40 4000K 38 38° V 0-10V W WHITE FG FROSTED GLASS • 60° ON REQUEST It is the measure of brightness from a light source. The lumen is a 30W 40 4000K 38 38° V 0-10V W WHITE FG FROSTED GLASS • 60° ON REQUEST It is the measure of brightness from a light source. The lumen is a
• CRI90 ON REQUEST ON • CRI90 ON REQUEST ON
35W 50 5000K D DALI REQUEST Do not be covered by other heat insulation basic unit for measuring brightness, just as the gram is a basic unit 35W 50 5000K D DALI REQUEST Do not be covered by other heat insulation basic unit for measuring brightness, just as the gram is a basic unit
• OPERATING TEMP. ITEMS • OPERATING TEMP. ITEMS
EXAMPLE: IN-DL-504-22W-40-38-SW-W-HC -30°C TO +40°C materials. EXAMPLE: IN-DL-504-22W-40-38-SW-W-HC -30°C TO +40°C materials.
for measuring mass. for measuring mass.
Fixture suitable to be installed on flammable Fixture suitable to be installed on flammable
surface surface
LED Chip Brands in Taiwan This value identify the out flux of the fitting at measured working LED Chip Brands in Taiwan This value identify the out flux of the fitting at measured working
Suitable for Indoor Use conditions according to norms UNI EN 13032-1:2012 and UNI Suitable for Indoor Use conditions according to norms UNI EN 13032-1:2012 and UNI
Suitable for Outdoor Use 13032-4:2015 operating in environments at 25° C temperature. Suitable for Outdoor Use 13032-4:2015 operating in environments at 25° C temperature.
Grounding connection mark (mark I protection Grounding connection mark (mark I protection
against electrical shook) against electrical shook)
Rate of energy consumption measured in Watts. Rate of energy consumption measured in Watts.
Class II protection against electrical shook Class II protection against electrical shook
Ⅲ Class III protection against electrical shook Ⅲ Class III protection against electrical shook
This values identify the real efficiency of the lighting fitting as it in- This values identify the real efficiency of the lighting fitting as it in-
dicates the out flux for each Watt absorbed by power grid. dicates the out flux for each Watt absorbed by power grid.
PRODUCT NO. CODE HOLE DIMENSION PRODUCT NO. CODE HOLE DIMENSION
LED Colours LED Colours
PAGE NUMBER DRAWINGS PAGE NUMBER DRAWINGS
PRODUCT FAMILY CODE PRODUCT FAMILY CODE
Defines the colour appearance of a white LED. CCT is defined in Defines the colour appearance of a white LED. CCT is defined in
INDOOR CODE 2700K Warm White 1 INDOOR CODE 2700K Warm White 1
degrees Kelvin; -a warm light is around 2700K, moving to neutral degrees Kelvin; -a warm light is around 2700K, moving to neutral
3000K Warm White 2 3000K Warm White 2
white at around 4000K, and to cool white, at 5000K or more. Note white at around 4000K, and to cool white, at 5000K or more. Note
DRAWING DIMENSION DRAWING DIMENSION
4000K Natural White that CCT does not tell you anything about the color rendering 4000K Natural White that CCT does not tell you anything about the color rendering
5000K Day White ability of the LED. 5000K Day White ability of the LED.
PRODUCT PHOTO PRODUCT PHOTO
6500K Cool White 6500K Cool White
RGBW Red, Green, Blue, White A measure of a light source’s ability to show object colors RGBW Red, Green, Blue, White A measure of a light source’s ability to show object colors
MARKINGS & OTHER Dynamic White Dynamic White realistically or naturally; in other words, to accurately render all MARKINGS & OTHER Dynamic White Dynamic White realistically or naturally; in other words, to accurately render all
INFORMATION INFORMATION
frequencies of its color spectrum when compared to a perfect frequencies of its color spectrum when compared to a perfect
TABLE CODE PRODUCTS ON REQUEST reference light of a similar type. The ideal reference light is daylight, TABLE CODE PRODUCTS ON REQUEST reference light of a similar type. The ideal reference light is daylight,
IP Rating as this is the light source that shows colours in their most natural IP Rating as this is the light source that shows colours in their most natural
EXAMPLE CODE EXAMPLE CODE
and precise form. and precise form.
The IP Rating (Ingress protection or International Protection.) The IP Rating (Ingress protection or International Protection.)
These standards are used to define the levels of sealing These standards are used to define the levels of sealing
effectiveness of electrical enclosures against intrusion from It the behaviour and properties of light, including its interactions effectiveness of electrical enclosures against intrusion from It the behaviour and properties of light, including its interactions
foreign bodies such as dirt and water. with matter and the construction of instruments that use or detect foreign bodies such as dirt and water. with matter and the construction of instruments that use or detect
it. Optics usually describes the behaviour of visible, ultraviolet, and it. Optics usually describes the behaviour of visible, ultraviolet, and
Protection from object > 12.5mm in size, no pro- infrared light. Because light is an electromagnetic wave, other forms Protection from object > 12.5mm in size, no pro- infrared light. Because light is an electromagnetic wave, other forms
tection from rain of electromagnetic radiation such as X-rays,microwaves, and radio tection from rain of electromagnetic radiation such as X-rays,microwaves, and radio
Touch by fingers >12.5mm, water spray < 60 waves exhibit similar properties. Touch by fingers >12.5mm, water spray < 60 waves exhibit similar properties.
degrees from vertical degrees from vertical

Depending on the driver/ transformer the lighting equipment Depending on the driver/ transformer the lighting equipment
is controlled via ON/OFF (Switching) or Dimming (Phase, is controlled via ON/OFF (Switching) or Dimming (Phase,
Protection from object > 1mm in size (eg wire) no Protection from object > 1mm in size (eg wire) no
protection from rain 0-10V & DALI) protection from rain 0-10V & DALI)