Page 119 - Foton Workshop Manual - Aumark (BJ1099)

03-33
MAINTENANCE SPECIFICATION - AXLE AND TRANSMISSION SHAFT

Radial clearance of the Front axle <0.06mm
planet gear and the
planet gear shaft Rear axle <0.06mm

Radial clearance Front axle 0.05~0.1mm
between the half axle
gear and the differential Rear axle 0.05~0.1mm
carrier 03
Spline clearance Front axle 0~0.076mm
between the half axle
gear and the output Rear axle 0~0.076mm
flange

Thickness of the thrust
washer of the half axle Standard value 1.22~1.28
gear
Thickness of the thrust
washer of the planet Standard value 0.762~0.826
gear

Driving Gear

Runout of the Front axle ≤ 0.1mm
cooperating face of the
driving gear flange Rear axle ≤ 0.2mm
Runout of the rabbet of Front axle ≤ 0.08mm

the driving gear flange Rear axle ≤ 0.08mm
Starting torque of the Front axle 0.49~0.69
driving gear Rear axle 1.5~2.6

Runout of the driving
gear installing surface of Standard value ≤ 0.2mm
the front differential gear

TORQUE REQUIREMENTS

Fasteners N•m

The connecting bolts between the transmission 65~79
shaft and the driving gear flange of the main retarde
Di sa ssemble a nd Front axle 59~69
assemble the oil drain
plug of main reducer Rear axle 38~45

Plug of oil filling of the Front axle 41~51
main retarder Rear axle 27~41

Page 119