Page 202 - Foton Workshop Manual - Aumark (BJ1099)

04-62 VEHICLE CARE - REPLACEMENT

6. Remove spark plug with a tool
NOTICE:
After unscrewing spark plug, set the ignition coil
in the head of spark plug, and then take out spark
plug.
7. Replace with a new spark plug until air
cylinder is covered and screwed down
Torque : 25~30N•m
NOTICE:
Set ignition coil in the head of spark plug, screw
into spark plug, then use a tool to fasten spark
plug.

8. Install ignition coil, assemble the fixed bolt
and fasten it
Torque : 10N•m

9. Connect ignition coil connector
10. Connect battery negative cable(Refer
to "Chapter 18 Starting and Charging--
Battery, Replacing")

Page 202