Page 285 - Foton Workshop Manual - Aumark (BJ1099)

ENGINE MECHANICAL SYSTEM - ENGINE ACCESSORY BELT 12A-17
ENGINE ACCESSORY BELT

OVERHAUL

1. Switch off the ignition
2. Open the engine hood
3. Wait until the engine cools down
4. Drain the coolant (Refer to "Chapter 16 Cooling - Coolant, Replacement")

5. Unscrew the clip screw and pull out the
engine water outlet hose
12A

fuwx12A023

6. With the toolkit, turn the accessory belt
tensioner bolt clockwise, until the
accessory belt is completely loose

fuwx12A024

7. Remove and examine the accessory belt, replace it in case of any of the following
damages
NOTICE:
• Water or grease on the belt will quickly reduce its service life. Therefore, after removal,
protect the belt, the belt pulley and the tensioner from water or grease. Do not wash these
parts. In case of heavy contamination, replace it with a new one.
• If any water or grease is found on these parts, check whether there is fluid leakage in the
engine.

Page 285