Page 298 - Foton Workshop Manual - Aumark (BJ1099)
P. 298
12B-8 ENGINE MECHANICAL - ENGINE ASSEMBLY
(d). Gently push the generator, take off the
drive belt of the generator.
NOTICE:
If there is water or grease on the belt, the service
life of the belt would be sharply decreased, so
after the removal, pay close attention to not
allowing the water or grease adhering to and
contaminate the belt.
3. Remove generator
(a). Remove generator tensioning block fixed
bolt ① .
(b). Remove generator fixed nut ② , take
out the fixed bolt, take off the generator
assembly.
NOTICE:
When removing the generator assembly, firstly
hold the generator by hand, then carefully take
out the bolt, don't knock against the generator.
(c). Remove generator support fixed bolt, take
out the generator support.
Page 298
