Page 348 - Foton Workshop Manual - Aumark (BJ1099)

12B-58 ENGINE MECHANICAL - ENGINE ASSEMBLY

(e). Install the intermediate shaft sprocket 2 to
the intermediate shaft.
NOTICE:
When installing the intermediate shaft sprocket
2, it shall be ensured that the round hole on the
edge of wheel aligns to the round hole of sprocket
wheel1.

(f). Install the fixed bolt of intermediate shaft
sprocket and fasten it according to
requirements.
Step 1: Fasten to65~75N•m
Step 2: Loosen60°
Step 3: Fasten to100N•m

(g). Install the tensioner 1, install the fixed bolts
and fasten them.
Torque : 30N•m
NOTICE:
When installing the tensioner1, ensure that the
tensioner1is in state of compression.
(h). Pull out the locking small-gauge wire of the
tensioner1.

Page 348